1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Replacement parts
Sony a7C II cold-shoe cap
This is not a fixed STL. SpeakCAD generates the sony a7c ii cold-shoe cap to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a sony a7c ii cold-shoe cap is
A cap that covers the a7C II hot shoe so the contacts stay clean in a bag. The plate is 20 × 18 × 6 mm with the official ISO shoe taper. Print in PETG with 1.2 mm walls.
The a7 IV Arca plate is a different part. Tell SpeakCAD a7C II vs a7C R, preview the cap in the browser without paying, then download the STL.
Example prompt
Model an a7C II cold-shoe cap 20×18×6 mm with ISO shoe taper, 1.2 mm PETG.
People also search
a7c ii shoe cap stlsony a7c ii hot shoe cover 3d printa7c2 shoe capsony cold shoe cover 3d model
Questions people ask about a sony a7c ii cold-shoe cap
A cap that covers the a7C II hot shoe so the contacts stay clean in a bag. The plate is 20 × 18 × 6 mm with the official ISO shoe taper. Print in PETG with 1.2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an a7C II cold-shoe cap 20×18×6 mm with ISO shoe taper, 1.2 mm PETG.
The a7 IV Arca plate is a different part. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Kuat NV bike rack wheel tray end capThe plastic caps on the ends of Kuat NV and Sherpa wheel trays crack in the cold and let water into the extrusion.Stryd foot-pod shoe-clip spareA spare clip that holds a Stryd running pod (about 28 × 25 × 10 mm) on a lacing pattern 8–14 mm wide.Roomba j9+ cliff-sensor shimA 1.2 mm shim that sits under a j9+ cliff sensor so dark hardwood is not read as a stair.IKEA TROFAST frame 35 mm caster riserA 35 mm riser that adds a 40 mm caster under a TROFAST frame so the unit rolls to the next room.IKEA KALLAX insert-drawer stopA stop that keeps a KALLAX drawer insert (33 cm cube) from being pulled out of the cube.Sliding wardrobe door roller carriageSliding wardrobe doors ride on small roller carriages that split along the axle after years of use, making the door drop and scrape.