1
Enclosures & cases
Senseair S8 CO2 sensor wall case
This is not a fixed STL. SpeakCAD generates the senseair s8 co2 sensor wall case to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a Senseair S8 wall case, 34.5×21×10 mm sensor bay, 20×12 mm grille of 1.5 mm slots, 22.5×18 mm ESP32-C3 bay, two 4 mm keyholes, 1.6 mm walls.
What a senseair s8 co2 sensor wall case is
A wall case for a Senseair S8 NDIR module (33.5 × 20 × 8.5 mm) with its diffusion membrane facing a 20 × 12 mm grille of 1.5 mm slots. The bay is 34.5 × 21 × 10 mm with 0.5 mm clearance, a second bay takes a 22.5 × 18 mm ESP32-C3 SuperMini, and the back has two 4 mm keyhole slots. Print in PLA with 1.6 mm walls.
The SCD41 is a tiny photoacoustic module, so an SCD case leaves the S8 loose. Open the model in SpeakCAD at no cost, adjust the bays in the chat or the viewer, then download the STL.
People also search
senseair s8 case stlsenseair s8 enclosure 3d prints8 co2 sensor wall boxsenseair s8 esphome case 3d model
Questions people ask about a senseair s8 co2 sensor wall case
A wall case for a Senseair S8 NDIR module (33.5 × 20 × 8.5 mm) with its diffusion membrane facing a 20 × 12 mm grille of 1.5 mm slots. The bay is 34.5 × 21 × 10 mm with 0.5 mm clearance, a second bay takes a 22.5 × 18 mm ESP32-C3 SuperMini, and the back has two 4 mm keyhole slots. Print in PLA with 1.6 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a Senseair S8 wall case, 34.5×21×10 mm sensor bay, 20×12 mm grille of 1.5 mm slots, 22.5×18 mm ESP32-C3 bay, two 4 mm keyholes, 1.6 mm walls.
The SCD41 is a tiny photoacoustic module, so an SCD case leaves the S8 loose. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
Battery pack case for three AA cells with switchA compact holder for three AA cells side by side, with a slot for a standard 19 x 13 mm slide switch and a wire exit, giving a 4.5 V supply for LED strips, s…Heltec LoRa V3 Meshtastic case with SMA antenna holeA rugged node case for the Heltec WiFi LoRa 32 V3, the board most Meshtastic beginners start with.Shelly 2PM Gen3 DIN-rail adapterAn adapter that snaps a Shelly 2PM Gen3 onto a 35 mm DIN rail with 0.3 mm clearance.Raspberry Pi 5 M.2 HAT+ NVMe caseA case for a Raspberry Pi 5 (85 × 56 mm) with the official M.2 HAT+ and a 2230 or 2242 NVMe drive on top.INA219 power meter caseA case for an INA219 current sensor module (about 25 × 22 mm), a 0.91 inch OLED and a Nano or ESP32-C3 as an inline power meter.SHT31 and ESP32-C3 wall sensor caseA flat wall case for an SHT31-D breakout (most are under 20 × 15 mm) and an ESP32-C3 SuperMini (22.5 × 18 mm), with the sensor in a vented chimney below the…