1
Enclosures & cases
Seeed XIAO ESP32S3 Sense camera case
This is not a fixed STL. SpeakCAD generates the seeed xiao esp32s3 sense camera case to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a XIAO ESP32S3 Sense case, 21.8×18.6×16 mm cavity, 7 mm lens hole, 9.5×3.8 mm USB-C slot, microSD slot, 5 mm antenna exit, 1.2 mm walls.
What a seeed xiao esp32s3 sense camera case is
A case for a Seeed XIAO ESP32S3 Sense (21 × 17.8 mm board with the camera expansion board, about 15 mm tall). The cavity is 21.8 × 18.6 × 16 mm with a 7 mm lens hole, a 9.5 × 3.8 mm USB-C opening, a microSD slot and a 5 mm U.FL antenna exit. Walls are 1.2 mm and the back has a 1/4-20 insert pocket. Print lens-side down in PETG.
The plain XIAO ESP32S3 or ESP32C3 has no camera board and is much thinner. Open the ready-made model in SpeakCAD for free, change any millimetre, then download the STL.
People also search
xiao esp32s3 sense case stlxiao esp32s3 sense camera enclosureseeed xiao sense case 3d printxiao s3 sense housing 3d model
Questions people ask about a seeed xiao esp32s3 sense camera case
A case for a Seeed XIAO ESP32S3 Sense (21 × 17.8 mm board with the camera expansion board, about 15 mm tall). The cavity is 21.8 × 18.6 × 16 mm with a 7 mm lens hole, a 9.5 × 3.8 mm USB-C opening, a microSD slot and a 5 mm U.FL antenna exit. Walls are 1.2 mm and the back has a 1/4-20 insert pocket. Print lens-side down in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a XIAO ESP32S3 Sense case, 21.8×18.6×16 mm cavity, 7 mm lens hole, 9.5×3.8 mm USB-C slot, microSD slot, 5 mm antenna exit, 1.2 mm walls.
The plain XIAO ESP32S3 or ESP32C3 has no camera board and is much thinner. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
HC-SR501 PIR sensor dome caseA case for an HC-SR501 PIR module (32 × 24 mm board) that lets its 23 mm Fresnel dome poke through a 23.5 mm front hole.Handheld control box for four push buttonsA palm-sized housing for four 12 mm momentary push buttons, useful as a shortcut pad or a machine pendant.Wemos D1 Mini enclosure with DHT22 sensor slotA wall-mountable box for a Wemos D1 Mini (34.2 x 25.6 mm) with a dedicated slot for a DHT22 temperature and humidity sensor.ESP32-S3 SuperMini case with USB-CA snap case for an ESP32-S3 SuperMini with a USB-C window, two GPIO slots and 2 mm vents.Arduino Mega 2560 caseA case for an Arduino Mega 2560 R3 (101.5 × 53.3 mm).L298N motor driver caseA vented case for the red L298N dual motor driver (43 × 43 mm, about 27 mm tall with the heatsink).