1
Replacement parts
Samsung fridge door bin side clip
This is not a fixed STL. SpeakCAD generates the samsung fridge door bin side clip to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Samsung fridge door bin side clip, 18×25 mm plate 3 mm thick, 2.5 mm hook for the door liner rib, PETG.
What a samsung fridge door bin side clip is
A side clip for Samsung fridge door bins, the small tab that holds the clear bin onto the ribs of the door liner and snaps when the bin is overloaded. The clip is 18 × 25 mm with a 2.5 mm hook that catches the liner rib and a 3 mm plate that bonds or screws to the bin end. Print flat in PETG.
LG and Whirlpool door bins hook onto the liner differently, so compare the rib shape first. Open the ready-made clip for free in SpeakCAD, adjust the hook in the chat or the viewer, then download the STL.
People also search
samsung fridge door bin clipsamsung refrigerator door shelf clipsamsung fridge door bin repair 3d printsamsung door bin clip stl
Questions people ask about a samsung fridge door bin side clip
A side clip for Samsung fridge door bins, the small tab that holds the clear bin onto the ribs of the door liner and snaps when the bin is overloaded. The clip is 18 × 25 mm with a 2.5 mm hook that catches the liner rib and a 3 mm plate that bonds or screws to the bin end. Print flat in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Samsung fridge door bin side clip, 18×25 mm plate 3 mm thick, 2.5 mm hook for the door liner rib, PETG.
LG and Whirlpool door bins hook onto the liner differently, so compare the rib shape first. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA SMÅSTAD drawer-stop clipA clip that keeps a SMÅSTAD kids drawer from being pulled all the way out, 22 × 14 × 10 mm with a 3 mm lip that grabs the official runner.Creality K1 lid riserA riser frame that sits on top of a Creality K1 (355 × 355 × 480 mm) and holds the glass lid 25 mm higher, letting heat out when printing PLA so the hotend a…Dishwasher rack tine tip caps for 3 mm wirePush-on caps that cover the rusting ends of dishwasher rack tines on Bosch, Siemens, Whirlpool and most other racks, whose tines are 2.5 to 3.5 mm steel wire.Kenwood Chef slow outlet coverA replacement cover for the front slow-speed outlet of Kenwood Chef mixers, the twist-on cap that keeps flour out of the drive.Extension cord reel crank handleCable reels are wound by a folding crank handle whose plastic knob and pivot break long before the cable does.Digital-caliper SR44 battery-door replacementA snap-in battery door for a 150 mm digital caliper that takes an SR44 / 357 cell, 16 mm across with a 0.6 mm lip.