1
Replacement parts
Samsung dishwasher lower rack roller
This is not a fixed STL. SpeakCAD generates the samsung dishwasher lower rack roller to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Samsung dishwasher lower rack roller, 30 mm wheel 9 mm tread on a 4 mm pin, clip bracket with 3.5 mm channel, PETG.
What a samsung dishwasher lower rack roller is
A lower rack roller for Samsung dishwashers in the style of the DD97-00xxx roller assemblies, about 30 mm across with a clip bracket. The wheel turns on a 4 mm pin with 0.3 mm clearance, the tread is 9 mm wide and the bracket clips to the rack rail with a 3.5 mm channel. Print the wheel flat and the bracket on its side in PETG.
Upper rack rollers on Samsung machines are a separate, smaller part. The ready-made roller opens free in SpeakCAD; set the exact diameter in the viewer or the chat, then save the STL.
People also search
samsung dishwasher lower rack wheelsamsung dishwasher roller replacementsamsung dishwasher wheel 3d printsamsung dishwasher rack roller stl
Questions people ask about a samsung dishwasher lower rack roller
A lower rack roller for Samsung dishwashers in the style of the DD97-00xxx roller assemblies, about 30 mm across with a clip bracket. The wheel turns on a 4 mm pin with 0.3 mm clearance, the tread is 9 mm wide and the bracket clips to the rack rail with a 3.5 mm channel. Print the wheel flat and the bracket on its side in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Samsung dishwasher lower rack roller, 30 mm wheel 9 mm tread on a 4 mm pin, clip bracket with 3.5 mm channel, PETG.
Upper rack rollers on Samsung machines are a separate, smaller part. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA SKOGSTA bench felt foot capsCaps that slip over SKOGSTA bench legs (about 45 × 45 mm acacia) so the bench does not dent a wood floor.Elegoo Centauri Carbon lid riserA riser that holds the glass lid of an Elegoo Centauri Carbon (about 400 × 405 × 485 mm) 20 mm above the frame to vent the chamber when printing PLA.Beko freezer drawer front handleA clip-on handle for Beko and Blomberg freezer drawers, whose moulded front lip snaps off.Roller blind bottom bar end capEnd caps for the bottom weight bar of roller blinds, which stop the bar sliding out of its fabric pocket.Ironing board leg end capIroning board feet wear through and the bare steel tube scratches floors and slides on tile.Combination-square head replacement 300 mmA replacement head for a 300 mm combination square with a 1 mm rule slot, a 45 degree face, and an M5 lock.