1
Brackets & mounts
ROG Ally X wall mount cradle
This is not a fixed STL. SpeakCAD generates the rog ally x wall mount cradle to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a ROG Ally X wall cradle, 230×40 mm plate, two grip cups 40 mm wide 38 mm deep, open top for USB-C, three 4 mm holes, 3 mm walls.
What a rog ally x wall mount cradle is
A wall cradle for an ASUS ROG Ally X (280.6 × 111.3 mm, 24.7 to 36.9 mm thick) that holds it by the deeper grips and keeps the top USB-C and USB4 ports open for charging. Two grip cups are 40 mm wide and 38 mm deep with 1 mm clearance, on a 230 × 40 mm plate with three 4 mm holes. Print in PETG, 3 mm walls.
The original ROG Ally is thinner at 32.4 mm and rattles in these cups. Open the ready-made cradle in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
rog ally x wall mount stlrog ally x holder 3d printrog ally x wall cradlerog ally x wall mount 3d model
Questions people ask about a rog ally x wall mount cradle
A wall cradle for an ASUS ROG Ally X (280.6 × 111.3 mm, 24.7 to 36.9 mm thick) that holds it by the deeper grips and keeps the top USB-C and USB4 ports open for charging. Two grip cups are 40 mm wide and 38 mm deep with 1 mm clearance, on a 230 × 40 mm plate with three 4 mm holes. Print in PETG, 3 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a ROG Ally X wall cradle, 230×40 mm plate, two grip cups 40 mm wide 38 mm deep, open top for USB-C, three 4 mm holes, 3 mm walls.
The original ROG Ally is thinner at 32.4 mm and rattles in these cups. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Wahoo ELEMNT Bolt out-front mount for 35 mm barsOversized 35 mm handlebars are common on modern gravel and mountain bikes, yet most Wahoo mounts ship for 31.8 mm only.IKEA Billy bookcase anti-tip wall bracketA low-profile bracket that ties the top of an IKEA Billy bookcase to the wall and replaces the flimsy strap or a lost original fitting.Studio Display iPhone Continuity Camera mountA MagSafe clip that hangs an iPhone 16 or 17 on the top bezel of a Studio Display for Continuity Camera, 8–14 mm bezel clamp and a 56 mm MagSafe disc.HC-SR04 ultrasonic sensor mountA mount for an HC-SR04 ultrasonic sensor (45 × 20 mm, two 16 mm transducers).J1772 EV connector wall holster with drip slotA wall holster for a J1772 (Type 1) charging handle, with a round socket about 46 mm across that the plug nose drops into and a 12 mm slot for the latch butt…Nikon Z6 III Arca-Swiss plateAn Arca-Swiss plate for the Nikon Z6 III (138.5 × 101.5 × 74 mm).