1
Hobby & gaming
PS5 Slim vertical stand ring
This is not a fixed STL. SpeakCAD generates the ps5 slim vertical stand ring to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a PS5 Slim vertical stand, 140×120×12 mm base, 98 mm wide 15 mm deep cradle, 1 mm TPU liner groove, rear vent clearance, 4 mm walls.
What a ps5 slim vertical stand ring is
A low vertical stand for a PS5 Slim standing on its 96 mm edge (80 mm for the Digital Edition, console 358 × 216 mm). The base is 140 × 120 × 12 mm with a 98 mm wide, 15 mm deep cradle lined for a 1 mm TPU strip, and 20 mm of open space under the rear vents. Print in PETG flat, 4 mm walls, 30 % infill.
Sony's own vertical stand screws into the base, but a PS5 Pro is thinner at 89 mm and wobbles in this cradle. Open the ready-made stand in SpeakCAD for free, edit the cradle width in the viewer or the chat, then download the STL.
People also search
ps5 slim vertical stand stlps5 slim stand 3d printps5 slim vertical baseps5 slim stand 3d model
Questions people ask about a ps5 slim vertical stand ring
A low vertical stand for a PS5 Slim standing on its 96 mm edge (80 mm for the Digital Edition, console 358 × 216 mm). The base is 140 × 120 × 12 mm with a 98 mm wide, 15 mm deep cradle lined for a 1 mm TPU strip, and 20 mm of open space under the rear vents. Print in PETG flat, 4 mm walls, 30 % infill.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a PS5 Slim vertical stand, 140×120×12 mm base, 98 mm wide 15 mm deep cradle, 1 mm TPU liner groove, rear vent clearance, 4 mm walls.
Sony's own vertical stand screws into the base, but a PS5 Pro is thinner at 89 mm and wobbles in this cradle. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Meta Quest Link cable head strap clipA clip that keeps a Quest Link or USB-C PCVR cable (4 to 6 mm thick) tight against the head strap so the plug is not pulled sideways out of the headset.Drumstick holder for stand clampA holder that clamps to a drum or cymbal stand and keeps four pairs of sticks upright.RC car body post extensionBody post extensions raise an RC car shell to clear larger tyres or a taller chassis, and the stock posts are rarely long enough.Meta Quest 3 head strap battery pack mountA counterweight cradle that straps a slim USB power bank to the rear of a Meta Quest 3 or Quest 3S standard head strap, extending play time and balancing the…Toniebox 2 wall shelf with Tonie pegsA 220 mm shelf that holds a Toniebox 2 and six Tonies on 8 mm pegs.Boss RC-5 pedalboard riserA 20 mm riser that lifts an RC-5 so you can hit it behind a row of 55 mm pedals, 75 × 65 mm with 3M-pad recesses.