1
Brackets & mounts
Prusa MK4S frame webcam mount
This is not a fixed STL. SpeakCAD generates the prusa mk4s frame webcam mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a webcam arm for the Prusa MK4S frame, 6.2 mm clamp slot with M3 pinch screw, 150 mm arm with two M5 hinges, 1/4-20 screw head.
What a prusa mk4s frame webcam mount is
An arm that clamps to the top of the MK4S frame, about 6 mm thick, and holds a webcam with a 1/4-20 screw, for timelapses or remote monitoring through PrusaConnect. The clamp has a 6.2 mm slot and an M3 pinch screw, the arm is 150 mm long with two hinges held by M5 bolts, and the head takes a 1/4-20 screw for a Logitech C920 or a Raspberry Pi camera case. Print in PETG, flat.
The CORE One has its own camera mounting points, so this clamp is for the MK4 family. Open the model in SpeakCAD at no cost, change the arm length in the viewer or the chat, then download the STL.
People also search
prusa mk4s webcam mount stlmk4 camera mountprusa frame camera armmk4s timelapse camera mount 3d print
Questions people ask about a prusa mk4s frame webcam mount
An arm that clamps to the top of the MK4S frame, about 6 mm thick, and holds a webcam with a 1/4-20 screw, for timelapses or remote monitoring through PrusaConnect. The clamp has a 6.2 mm slot and an M3 pinch screw, the arm is 150 mm long with two hinges held by M5 bolts, and the head takes a 1/4-20 screw for a Logitech C920 or a Raspberry Pi camera case. Print in PETG, flat.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a webcam arm for the Prusa MK4S frame, 6.2 mm clamp slot with M3 pinch screw, 150 mm arm with two M5 hinges, 1/4-20 screw head.
The CORE One has its own camera mounting points, so this clamp is for the MK4 family. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
iPhone 16 Pro Max car vent mount with MagSafe cutoutA cradle that hooks over a horizontal dashboard vent slat and holds an iPhone 16 Pro Max (163 x 77.6 x 8.25 mm) in portrait or landscape.Wyze Cam v3 corner wall mount with rain hoodA corner bracket for the Wyze Cam v3, a 51 x 53 x 58 mm camera with a 1/4 inch-20 thread in its base.Wyze Cam v4 eave mount with sun hoodAn eave bracket that hangs a Wyze Cam v4 (about 55 × 55 × 90 mm with the stand) under a soffit with a 20 mm sun hood.DeWalt FLEXVOLT battery wall rackA rack that hangs four FLEXVOLT 60V/20V batteries (about 110 × 80 mm) on a stud so they are not mixed with 20V MAX packs.Creality Ender-3 V3 SE webcam mountAn articulated webcam arm that bolts to the top 2040 beam of an Ender-3 V3 SE, for OctoPrint or Klipper timelapses.Insta360 X4 bike handlebar 1/4-20 mountA handlebar clamp for 31.8 mm bars with a captive 1/4-20 bolt on top, so an Insta360 X4 (46 × 123.6 × 37.6 mm) or a selfie stick screws straight on.