1
Replacement parts
Prusa CORE One riser feet
This is not a fixed STL. SpeakCAD generates the prusa core one riser feet to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create riser feet for a Prusa CORE One, 50×50 mm, 30 mm lift, 25 mm pocket 6 mm deep, internal ribs, 3 mm walls.
What a prusa core one riser feet is
Riser feet for a Prusa CORE One (about 415 × 435 mm footprint) that lift it 30 mm so the bottom intake gets more air and a drawer tray can slide under the front. Each foot is a 50 mm square with a 25 mm pocket 6 mm deep for the stock foot, internal ribs and 3 mm walls. Print in PETG, pocket up, 30% gyroid.
The MK4S is an open bed-slinger with a different footprint, so these feet sit wrong on it. Open the model in SpeakCAD for free, change the height or the pocket in the viewer or the chat, then download the STL.
People also search
prusa core one feet stlcore one riserprusa core one printer feetcore one riser feet 3d print
Questions people ask about a prusa core one riser feet
Riser feet for a Prusa CORE One (about 415 × 435 mm footprint) that lift it 30 mm so the bottom intake gets more air and a drawer tray can slide under the front. Each foot is a 50 mm square with a 25 mm pocket 6 mm deep for the stock foot, internal ribs and 3 mm walls. Print in PETG, pocket up, 30% gyroid.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create riser feet for a Prusa CORE One, 50×50 mm, 30 mm lift, 25 mm pocket 6 mm deep, internal ribs, 3 mm walls.
The MK4S is an open bed-slinger with a different footprint, so these feet sit wrong on it. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
De'Longhi Magnifica drip tray floatA replacement float for the drip tray of De'Longhi Magnifica S and other ECAM bean-to-cup machines, the red indicator that pops up when the tray is full.Fridge door shelf bracket supportRefrigerator door shelves hang on small plastic supports that go brittle in the cold and crack under a full milk carton.IKEA Billy shelf pin replacement for 5 mm holesA replacement shelf support for the IKEA Billy bookcase, Hemnes and Ivar, which use 5 mm holes and lose pins every time you move house.Breville Bambino Plus drip-tray gridA replacement grid for a Breville Bambino Plus drip tray (about 200 × 90 mm) with 4 mm bars on 8 mm centres so cups sit level after the official grid rusts.Sony a7C II cold-shoe capA cap that covers the a7C II hot shoe so the contacts stay clean in a bag.Bosch dishwasher upper basket rollerA replacement roller for the upper basket of Bosch and Siemens dishwashers, the small wheel that runs in the plastic rail on each side wall (about 20 mm acro…