1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Everyday fixes
Porsche Taycan charge-port holster
This is not a fixed STL. SpeakCAD generates the porsche taycan charge-port holster to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a porsche taycan charge-port holster is
A garage holster that parks a Taycan Type 2 or NACS adapter and the charge-port cap so they are not on the floor. The well is 180 × 80 × 50 mm with two 4.5 mm holes. Print in PETG with 2 mm walls.
The Ioniq 6 and NACS-to-J1772 holsters are different adapters. Describe adapter length in SpeakCAD, preview the holster in the browser for free, then download the STL.
Example prompt
Create a Taycan charge-port holster 180×80×50 mm with a cap well and two 4.5 mm holes, 2 mm PETG.
People also search
taycan charger holster stlporsche taycan adapter holder 3d printtaycan charge docktaycan ev holster 3d model
Questions people ask about a porsche taycan charge-port holster
A garage holster that parks a Taycan Type 2 or NACS adapter and the charge-port cap so they are not on the floor. The well is 180 × 80 × 50 mm with two 4.5 mm holes. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Taycan charge-port holster 180×80×50 mm with a cap well and two 4.5 mm holes, 2 mm PETG.
The Ioniq 6 and NACS-to-J1772 holsters are different adapters. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
Rivian R1S door-pocket bottle stopA stop that keeps a 70 mm bottle from falling out of an R1S door pocket on a trail.Bottle cage adapter for small framesSmall frames and full-suspension bikes often leave no room for a standard bottle cage in the normal position.Aquarium plant tweezers and scissors holderAquascaping tools are long and sharp, and leaving them on the cabinet top means wet drips and lost tweezers.Google Pixel Buds Pro 2 case carabiner clip holderA cradle that snaps around the Google Pixel Buds Pro 2 charging case (about 63 x 50 x 25 mm) and adds a carabiner loop so the earbuds clip onto a bag strap o…iPhone 17 Pro Max MagSafe car vent mountA clip-on car vent mount for an iPhone 17 Pro Max (about 163 × 78 × 8.8 mm) that hangs from a horizontal slat 8–14 mm thick.Tesla Model Y Juniper console-lid organizerA shallow organizer that sits under a Juniper Model Y console lid for cards and a USB-C dongle, 140 × 70 × 12 mm.