1
Replacement parts
Philips 2200 drip tray grid
This is not a fixed STL. SpeakCAD generates the philips 2200 drip tray grid to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a Philips 2200 drip tray grid, 150×80×2.5 mm with 3 mm slots, 2 mm rim, PETG.
What a philips 2200 drip tray grid is
A replacement drip tray grid for Philips 2200 and 3200 series bean-to-cup machines (the EP2220, EP3246 family), about 150 × 80 mm on most units. The grid is 2.5 mm thick with 3 mm drain slots between 2 mm ribs, a 2 mm locating rim underneath and 0.4 mm clearance all round so it lifts out easily. Print face down in PETG, which tolerates hot water and descaler better than PLA.
The Philips 5400 and LatteGo 4300 trays are wider, so measure the recess before printing. Open the ready-made grid in SpeakCAD for free, type your tray size in the chat or change it in the viewer, then download the STL.
People also search
philips 2200 drip tray gridphilips espresso drip tray coverphilips drip tray grid 3d printphilips 3200 drip tray stl
Questions people ask about a philips 2200 drip tray grid
A replacement drip tray grid for Philips 2200 and 3200 series bean-to-cup machines (the EP2220, EP3246 family), about 150 × 80 mm on most units. The grid is 2.5 mm thick with 3 mm drain slots between 2 mm ribs, a 2 mm locating rim underneath and 0.4 mm clearance all round so it lifts out easily. Print face down in PETG, which tolerates hot water and descaler better than PLA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a Philips 2200 drip tray grid, 150×80×2.5 mm with 3 mm slots, 2 mm rim, PETG.
The Philips 5400 and LatteGo 4300 trays are wider, so measure the recess before printing. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA POÄNG ottoman felt glidesGlides that replace worn POÄNG ottoman feet (about 28 × 18 mm) so the stool slides without scratching.Voron 2.4 door handle for 3 mm panelsA door handle for the 3 mm acrylic or polycarbonate front doors of a Voron 2.4.LG washing machine detergent drawer handleA replacement front handle for LG front-loader detergent drawers, whose pull breaks off the drawer face.Dishwasher rack wheel replacementWhen a lower rack wheel cracks the whole basket drags and jams, yet the original spare often costs more than a set of four printed ones.Salomon Quicklace cord lock replacementSalomon Speedcross, Sense Ride and XA Pro trail shoes use a Quicklace system with a small two-hole cord lock that eventually cracks or loses its spring.Thule EasyFold wheel-tray end capA replacement end cap for a Thule EasyFold wheel tray, 40 × 25 mm with the stock 4 mm rib.