Hobby & gaming

Office chair caster cups for sim racing

Caster cups that sit under the wheels of an office chair and stop it rolling backwards when you press the brake pedal of a desk-mounted sim racing setup. Each cup is a 95 mm disc with a 72 mm pocket 14 mm deep, enough for the usual 50 to 65 mm twin-wheel caster, and four shallow recesses underneath for stick-on rubber feet that grip the floor. They are solid rings 20 mm tall that print pocket up, without supports; a chair needs five. Describe your measurements and SpeakCAD builds it with AI (credits), then download STL, 3MF or sliced G-code.
No ready-made model yet: building it uses credits (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime).Updated

No ready-made model for this part yet

Sign in and SpeakCAD builds it from the prompt below (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime). Want to try the editor first? The live demo is free, no account.
1

Describe

Sign in: the example prompt below is filled in. SpeakCAD builds the part from it with AI, 4 credits for the part on a plan, its first 3 small changes free (Maker: 50 credits a month for $7.99, cancel anytime). Replace any number with what you measured first.
2

Adjust

Change its numbers in the viewer for free, or ask the AI for a change in the chat (2 credits for a small change, 1 for a quick edit, 3 for a redesign; the first 3 small changes are free on a plan).
3

Print

Download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price.

Example prompt

Design a caster cup that stops an office chair rolling back when you brake in a desk-mounted sim racing setup. Round body 95 mm in diameter and 20 mm tall with a central pocket 72 mm across and 14 mm deep for a twin-wheel caster of 50 to 65 mm, leaving a 6 mm floor. A 3 mm chamfer on the pocket rim and a 4 mm chamfer on the outer top edge. On the underside, four round recesses 13 mm across and 1.5 mm deep on a 70 mm circle for 12.7 mm stick-on rubber feet. Print pocket up, no supports; a chair needs five.

Build it with AI opens the app with this prompt already typed. Replace any number with what you measured before sending it; the rest of the design stays consistent.

Fit notes

The pocket has to match the caster: too small and the wheel sits on the rim, too large and the chair still shifts a few millimetres every time you brake. Rollerblade-style replacement wheels are 75 mm and need a wider, deeper pocket. In SpeakCAD you type the diameter and width of your caster and the cup is sized around it.

Also searched as: sim racing chair caster cups stl, office chair wheel stopper 3d print, chair caster cup sim racing, stop office chair rolling sim pedals.

Questions people ask about office chair caster cups for sim racing

Caster cups that sit under the wheels of an office chair and stop it rolling backwards when you press the brake pedal of a desk-mounted sim racing setup. Each cup is a 95 mm disc with a 72 mm pocket 14 mm deep, enough for the usual 50 to 65 mm twin-wheel caster, and four shallow recesses underneath for stick-on rubber feet that grip the floor. They are solid rings 20 mm tall that print pocket up, without supports; a chair needs five.

There is no ready-made model for this part yet. Click Build it with AI and sign in: the example prompt on this page is filled in, and SpeakCAD builds the part from it in your browser (4 credits for the part on a plan, its first 3 small changes free). Change any number in the viewer for free, then download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime.

SpeakCAD builds it to your measurements from the example prompt on this page: the part uses 4 credits on a plan, its first 3 small changes free (3 without a plan), and a small change after them 2, then the STL or 3MF download is included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime. To try the editor before paying, the live demo is free, no account.

A shared STL is modelled for someone else's measurements. SpeakCAD builds this part to the millimetres you give it (AI requests use credits), so the file you download is sized for the part you actually own.

Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.

No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.

Build, adjust and print your office chair caster cups for sim racing

Nothing to install. The prompt is waiting in the app after you sign in: SpeakCAD builds the part with AI (credits), no CAD skills needed, you check the fit, then download the STL, 3MF or sliced G-code.

Looking for a finished design by a maker? Browse the hobby & gaming on the marketplace, where makers share their models, most of them free.