1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Hobby & gaming
Nintendo Switch 2 Joy-Con wall hooks
This is not a fixed STL. SpeakCAD generates the nintendo switch 2 joy-con wall hooks to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a nintendo switch 2 joy-con wall hooks is
A pair of hooks that hang Switch 2 Joy-Con (about 110 × 30 × 25 mm each) on a wall so they are not in a bowl. Each saddle is 32 × 27 mm with two 4.5 mm holes. Print two in PETG with 1.6 mm walls.
The Joy-Con charging-grip stand is a desk part. Describe left vs right in SpeakCAD, preview a hook in the browser without paying, then download the STL.
Example prompt
Model Switch 2 Joy-Con wall hooks, 32×27 mm saddle, two 4.5 mm holes, PETG, pair.
People also search
switch 2 joy-con hooks stlnintendo switch 2 joycon holder 3d printswitch 2 joy-con wallswitch 2 controller hooks 3d model
Questions people ask about a nintendo switch 2 joy-con wall hooks
A pair of hooks that hang Switch 2 Joy-Con (about 110 × 30 × 25 mm each) on a wall so they are not in a bowl. Each saddle is 32 × 27 mm with two 4.5 mm holes. Print two in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model Switch 2 Joy-Con wall hooks, 32×27 mm saddle, two 4.5 mm holes, PETG, pair.
The Joy-Con charging-grip stand is a desk part. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Steam Deck 2 travel-dock cable blockA block that holds a USB-C hub and the Deck 2 charger in a 160 × 80 × 30 mm travel case with 0.4 mm clearance.Sony FX30 cage NATO-rail stopA stop that clips onto an FX30 cage NATO rail (about 50 mm) so a handle does not slide off.Desk clamp headset hangerA headset hanger clamps to the edge of a desk and holds a gaming headset off the surface where it would otherwise gather cables and crumbs.Nintendo Switch Joy-Con comfort grip for single controllerA palm-filling grip that a single Joy-Con slides onto for sideways two-player sessions in Mario Kart or Smash.Citadel paint pot rack for 26 mm potsA three-tier stepped rack that holds 30 Games Workshop Citadel paint pots, the 12 ml flip-top pots that are about 26 mm across and 32 mm tall, tilted 15 degr…WLED hex-panel stand for six cellsA stand that holds a six-cell WLED hex (about 300 mm across) at 15 degrees with a 20 mm USB-C well in the base.