1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
Ninja Foodi PossibleCooker lid stand
This is not a fixed STL. SpeakCAD generates the ninja foodi possiblecooker lid stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ninja foodi possiblecooker lid stand is
A stand that parks a PossibleCooker lid (about 260 mm) on its side so the condensation drips into the pot, not the counter. The saddle is 12 mm and the base is 140 × 80 mm. Print in PETG with 2.4 mm walls.
The Creami pint rack is a different Ninja. Tell SpeakCAD 6 vs 8 cup, preview the stand in the browser without paying, then download the STL.
Example prompt
Model a PossibleCooker lid stand 140×80×40 mm, 12 mm saddle, 2.4 mm PETG.
People also search
ninja possiblecooker lid stand stlfoodi possiblecooker lid holder 3d printninja lid standpossiblecooker lid rack 3d model
Questions people ask about a ninja foodi possiblecooker lid stand
A stand that parks a PossibleCooker lid (about 260 mm) on its side so the condensation drips into the pot, not the counter. The saddle is 12 mm and the base is 140 × 80 mm. Print in PETG with 2.4 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a PossibleCooker lid stand 140×80×40 mm, 12 mm saddle, 2.4 mm PETG.
The Creami pint rack is a different Ninja. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
Vitamix Ascent A3500 cup drying treeA tree that dries two Ascent blending cups (about 600 ml, 80 mm ID) plus the blade bases so they are not in the dishwasher rack on their blades.Gravity-fed fridge can dispenserA two-lane rack that stores canned drinks in the fridge and rolls the next one forward as you take one.Tassimo T-Disc holder rack for 30 discsAn angled rack that stores Tassimo T-Discs on edge so you can read the barcode side and pick a flavour without digging.Wide mouth Mason jar sprouting lid with mesh 86 mmA sprouting lid for wide mouth Ball, Kerr or Bernardin Mason jars with the 86 mm thread, letting you rinse and drain alfalfa, lentil or broccoli sprouts twic…Vitamix Ascent tamper holster on the lidA holster that clips onto an Ascent lid handle and parks the tamper so it does not roll off the machine.Dyson V15 Detect HEPA filter drying rackA rack that stands a washed V15 Detect post-motor HEPA filter (about 70 mm diameter, 40 mm tall) on edge so it dries before it goes back in the cyclone.