1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
Nespresso Vertuo Pop drip-tray riser
This is not a fixed STL. SpeakCAD generates the nespresso vertuo pop drip-tray riser to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a nespresso vertuo pop drip-tray riser is
A 25 mm riser under a Vertuo Pop drip tray so a taller mug fits without removing the tray. The plate is 140 × 90 × 25 mm with 4 mm posts that register the official tray. Print in PETG with 2 mm walls.
The Vertuo Next extension is a different footprint. Describe mug height in SpeakCAD, preview the riser in the browser without paying, then download the STL.
Example prompt
Model a Vertuo Pop drip-tray riser 140×90×25 mm with four 4 mm register posts, 2 mm PETG.
People also search
vertuo pop riser stlnespresso vertuo pop mug stand 3d printvertuo pop drip traynespresso pop taller cup 3d model
Questions people ask about a nespresso vertuo pop drip-tray riser
A 25 mm riser under a Vertuo Pop drip tray so a taller mug fits without removing the tray. The plate is 140 × 90 × 25 mm with 4 mm posts that register the official tray. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Vertuo Pop drip-tray riser 140×90×25 mm with four 4 mm register posts, 2 mm PETG.
The Vertuo Next extension is a different footprint. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
Instant Pot lid holder that hooks on the side handleA hook that slides over the side handle of an Instant Pot Duo or Ninja Foodi and holds the lid upright at the side of the base while you stir or serve, so co…KitchenAid Artisan bowl-lift splash guardA 220 mm splash ring that sits on a 4.8 L Artisan bowl-lift bowl with a 30 mm pour gap and a 6 mm beater clearance.Dyson Airwrap Complete Long standA counter stand that holds a Dyson Airwrap Complete Long (about 41 mm handle, 270 mm long) barrel-up so the cord does not yank it over.Instant Pot Duo Plus lid wall holderA holder that hangs a Duo Plus lid (about 240 mm) on a cabinet door so the sealing ring dries and the lid is not on the hob.Cutlery tray sized to your kitchen drawerA five-section cutlery tray built to the exact internal width and depth of a kitchen drawer so it does not slide about or waste space at the sides.Bin bag roll dispenser for cabinet doorA slim box that holds a roll of bin bags inside a cabinet door and feeds one out through a slot.