1
Desk & office
MOTU M2 angled desk stand
This is not a fixed STL. SpeakCAD generates the motu m2 angled desk stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a 15° desk stand for a MOTU M2, 192×111 mm cradle with 12 mm side lips, open rear, 8 mm front ledge, 2.4 mm walls.
What a motu m2 angled desk stand is
A stand that tilts a MOTU M2 audio interface (about 190 × 109 × 45 mm) 15° towards you so the meters and knobs are easier to read. The cradle is 192 × 111 mm with 12 mm side lips, the rear is open for the jacks and USB-C, and a front ledge 8 mm high stops it sliding. Print flat in PLA or PETG with 2.4 mm walls.
The MOTU M4 is about 50 mm wider, so it will not drop in. Open the ready-made model in SpeakCAD for free, change the angle or any millimetre in the viewer or the chat, then download the STL.
People also search
motu m2 stand stlmotu m2 desk stand 3d printaudio interface standmotu m2 angled stand
Questions people ask about a motu m2 angled desk stand
A stand that tilts a MOTU M2 audio interface (about 190 × 109 × 45 mm) 15° towards you so the meters and knobs are easier to read. The cradle is 192 × 111 mm with 12 mm side lips, the rear is open for the jacks and USB-C, and a front ledge 8 mm high stops it sliding. Print flat in PLA or PETG with 2.4 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a 15° desk stand for a MOTU M2, 192×111 mm cradle with 12 mm side lips, open rear, 8 mm front ledge, 2.4 mm walls.
The MOTU M4 is about 50 mm wider, so it will not drop in. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Bose Smart Ultra soundbar cable combA comb that sits behind a Smart Ultra soundbar and separates HDMI eARC, power and optical so they do not knot.Angled desk phone stand with cable slotA 60 degree cradle that holds a phone upright for video calls while a charging cable passes up through a slot in the base.Logitech Brio webcam clip for thin bezel monitorsA replacement clip for the Logitech Brio 4K webcam that grips a monitor with a bezel under 6 mm, which the stock mount slides off.COROS Pace 3 charger clip dockA bedside dock that holds a COROS Pace 3 (about 42 mm) on its pogo-clip charger at 20 degrees.MacBook Pro 16-inch M4 Pro vertical standA vertical stand for a 16-inch MacBook Pro M4 Pro (about 16.8 mm closed, 356 mm wide) with a 18 × 358 mm slot, a 24 mm MagSafe cutout and a 160 × 110 mm base.AirPods Pro 3 desk charging wellA well that parks an AirPods Pro 3 case (about 61 × 46 × 22 mm) on its USB-C or MagSafe side so the stem LEDs stay visible.