1
Adapters & couplers
Motorcycle mirror extender riser M10
This is not a fixed STL. SpeakCAD generates the motorcycle mirror extender riser m10 to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a motorcycle mirror riser, 20 mm hex body 30 mm tall, 10.5 mm through-hole, pocket for an M10 coupling nut, solid PETG.
What a motorcycle mirror extender riser m10 is
A riser that lifts a motorcycle mirror 30 mm higher so the rider sees past their own elbows. It is a 20 mm hex body 30 mm tall with a 10.5 mm through-hole and a pocket for an M10 coupling nut, so it bolts between the mirror and the perch with a standard M10 × 1.25 stud. Print upright in PETG or ASA with 100 percent infill.
Mirrors on the right side of many bikes use reverse threads, so buy the matching coupling nut. Open the ready-made riser in SpeakCAD for free, change the height or any millimetre in the viewer or the chat, then download the STL.
People also search
motorcycle mirror extendermirror riser m10 stlmotorcycle mirror spacer 3d printmirror extension motorcycle
Questions people ask about a motorcycle mirror extender riser m10
A riser that lifts a motorcycle mirror 30 mm higher so the rider sees past their own elbows. It is a 20 mm hex body 30 mm tall with a 10.5 mm through-hole and a pocket for an M10 coupling nut, so it bolts between the mirror and the perch with a standard M10 × 1.25 stud. Print upright in PETG or ASA with 100 percent infill.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a motorcycle mirror riser, 20 mm hex body 30 mm tall, 10.5 mm through-hole, pocket for an M10 coupling nut, solid PETG.
Mirrors on the right side of many bikes use reverse threads, so buy the matching coupling nut. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More adapters & couplers
GoPro mount to Garmin quarter-turn adapter for bike lightsA puck that lets a bike light with a GoPro-style two-finger foot, such as a Knog Blinder, Exposure Strada or Magicshine, hang from a spare Garmin quarter-tur…Raspberry Pi Camera Module 3 GoPro mount adapterAn adapter that puts a Raspberry Pi Camera Module 3 on any GoPro-style mount, giving access to hundreds of clamps, suction cups and helmet mounts.Peak Design Capture clip backing plate for thin strapsA spacer plate that sits behind a Peak Design Capture V3 clip so it clamps firmly onto thin backpack straps, seatbelt-style webbing or a 20 mm MOLLE row that…Peak Design Travel Tripod phone clampA clamp that puts a 70–85 mm phone on a Travel Tripod's cold shoe, 12 mm shoe and a 1/4-20 backup.Ford F-150 14th gen cup holder tumbler adapterAn adapter that sits in a 2021 or later F-150 console cup holder and holds a big 40 oz tumbler or 1.2 litre bottle upright.Broom handle thread adapter for a mismatched headA short adapter that lets a threaded broom or mop head screw onto a handle with a different thread, saving a perfectly good pole when the head is replaced.