1
Brackets & mounts
Motorcycle handlebar helmet hook for 22.2 mm bars
This is not a fixed STL. SpeakCAD generates the motorcycle handlebar helmet hook for 22.2 mm bars to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a handlebar helmet hook for 22.2 mm bars, two-piece clamp with two M5 bolts, 30 mm hook with 6 mm return lip, PETG.
What a motorcycle handlebar helmet hook for 22.2 mm bars is
A helmet hook that clamps to a 22.2 mm (7/8 inch) handlebar next to the grip, so a helmet can hang by its chin strap during a quick stop. The two-piece clamp closes with two M5 bolts, a 30 mm hook with a 6 mm return lip holds the strap D-ring, and a 25.4 mm version is one number away. Print on its side in PETG or ASA with 5 walls.
It is a convenience hook, not a lock; use a cable lock if you leave the bike. Open the ready-made hook in SpeakCAD for free, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
motorcycle helmet hookhandlebar helmet holder stlhelmet hook 22mm 3d printmotorbike helmet hanger
Questions people ask about a motorcycle handlebar helmet hook for 22.2 mm bars
A helmet hook that clamps to a 22.2 mm (7/8 inch) handlebar next to the grip, so a helmet can hang by its chin strap during a quick stop. The two-piece clamp closes with two M5 bolts, a 30 mm hook with a 6 mm return lip holds the strap D-ring, and a 25.4 mm version is one number away. Print on its side in PETG or ASA with 5 walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a handlebar helmet hook for 22.2 mm bars, two-piece clamp with two M5 bolts, 30 mm hook with 6 mm return lip, PETG.
It is a convenience hook, not a lock; use a cable lock if you leave the bike. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Viofo A229 rear camera rear window wedgeA wedge for the rear camera of a Viofo A229 Duo or A229 Pro 3CH that fixes the view on hatchbacks and SUVs with an almost flat rear window.Ukulele wall hanger for soprano and concertA compact wall hanger for soprano and concert ukuleles (about 35 mm nut width).Brompton handlebar mount for Garmin Edge computersBrompton M and S bars have a 22.2 mm grip section and very little real estate once the brake levers and shifter are on, so a normal out-front mount does not…Chuckit ball launcher wall mount with ball holderA garage or hallway mount that holds a Chuckit Classic 26M launcher upright by its handle and keeps two tennis balls ready beside it.Dyson V8 Absolute wand wall holsterA wall holster that parks a V8 Absolute wand and three click-in tools so you are not buying Dyson's official dock.LD2450 presence sensor tilt wall mountA wall mount for an HLK-LD2450 tracking radar (about 44 × 15 mm) that tilts it 15 degrees down, so the 120 degree field covers the room instead of the ceiling.