1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Everyday fixes
Meshtastic T-Deck Plus dash cradle
This is not a fixed STL. SpeakCAD generates the meshtastic t-deck plus dash cradle to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a meshtastic t-deck plus dash cradle is
A dash cradle that holds a T-Deck Plus at 40 degrees with a 14 mm USB-C slot and a 20 mm antenna clearance. Print in PETG.
A T-Deck on the seat slides under it. Describe the dash, preview the cradle in SpeakCAD without paying, then download the STL.
Example prompt
Model a T-Deck Plus dash cradle, 40 degrees, 14 mm USB-C, 20 mm antenna clearance, 2 mm PETG.
People also search
t-deck plus cradle stlmeshtastic t-deck car mount 3d printt-deck plus dash holderlilygo t-deck car cradle 3d model
Questions people ask about a meshtastic t-deck plus dash cradle
A dash cradle that holds a T-Deck Plus at 40 degrees with a 14 mm USB-C slot and a 20 mm antenna clearance. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a T-Deck Plus dash cradle, 40 degrees, 14 mm USB-C, 20 mm antenna clearance, 2 mm PETG.
A T-Deck on the seat slides under it. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
Tesla Model Y Juniper charge-cable hookA hook that hangs a NACS charge cable on the Juniper Model Y frunk or garage wall so the cable is not on the floor.Peak Design Everyday Backpack zip AirTag pouchA pouch that slips an AirTag into the 25 mm webbing of an Everyday Backpack 20L or 30L so it is not hanging on a zipper.Van cabinet magnetic key hookCampervans and work vans rarely have a good place for keys, and a hook that mounts with a magnet moves without drilling.EDC pocket organizer clip for pen and torchAn EDC organizer clip holds a pen and a small torch together on a pocket edge so they do not sink to the bottom.Litter-Robot 3 step ramp for small cats and kittensA step that sits in front of a Litter-Robot 3 or Litter-Robot 4 and lowers the jump into the globe, which is around 250 mm off the floor and too high for a k…Rivian R1T tonneau prop clipA clip that holds an R1T tonneau prop so it does not rattle in the bed, 20 mm snap.