Everyday fixes

iPhone 16 Pro camera lens protector bumper frame

A thin raised frame that sticks around the camera plateau of an iPhone 16 Pro, the rounded square that stands about 3 mm proud of the back and measures roughly 37 mm across with generous corner radii. The frame is 1.2 mm thick and 4 mm tall so it lands on a table before the sapphire lens covers do, with a 0.3 mm clearance inside and a shallow groove on the underside for a thin adhesive strip. Print it in TPU for a soft edge or PETG for rigidity, flat on its base.

Every Pro generation moves and resizes the camera plateau, so a downloaded bumper for the 15 Pro will not sit square on the 16 Pro. In SpeakCAD you measure your plateau once, preview the frame free in the browser, adjust the height or clearance in the chat, then download the STL.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Design a camera bumper frame 1.2 mm thick and 4 mm tall following a rounded square 37 x 37 mm with 9 mm corner radii, 0.3 mm inner clearance, a 0.4 mm deep adhesive groove on the underside, and a 0.5 mm outer chamfer on the top edge, for an iPhone 16 Pro.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More everyday fixes

Clothes hanger connector clipsHanger connectors let a second hanger dangle from the first, doubling closet space for shirts and trousers.EDC pocket organizer clip for pen and torchAn EDC organizer clip holds a pen and a small torch together on a pocket edge so they do not sink to the bottom.Leatherman Wave belt clip sheath holsterA rigid kydex-style holster for the Leatherman Wave+, Charge or Surge that clips onto a 40 mm belt or a MOLLE column and lets the tool drop into your palm wi…MAM pacifier clip with ring loop and strap slotA pacifier clip that fastens to a bib or shirt and holds a MAM, Philips Avent or NUK pacifier by its ring so it stops hitting the floor.Front fork mudguard for mountain bikeA fork-mounted mudguard sits under the crown and behind the arch to keep mud out of your eyes and off the stanchions.Dashboard key and sunglasses holderKeys and sunglasses slide around a flat dash and end up under the seat.

Make your iphone 16 pro camera lens protector bumper frame now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.