1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
Makita 18V LXT impact wall holster
This is not a fixed STL. SpeakCAD generates the makita 18v lxt impact wall holster to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a makita 18v lxt impact wall holster is
A holster that parks an 18V LXT impact (about 130 mm without battery) on a 4.5 mm hole pair. The well is 75 × 48 × 55 mm with a 18 mm trigger cutout. Print in PETG with 2.4 mm walls.
The LXT battery wall mount does not hold the tool. Describe DTW vs DTD in SpeakCAD, preview the holster in the browser at no cost, then download the STL.
Example prompt
Design an 18V LXT impact holster 75×48×55 mm, 18 mm trigger cutout, two 4.5 mm holes, 2.4 mm PETG.
People also search
makita impact holster stl18v lxt wall holder 3d printmakita impact docklxt impact holster 3d model
Questions people ask about a makita 18v lxt impact wall holster
A holster that parks an 18V LXT impact (about 130 mm without battery) on a 4.5 mm hole pair. The well is 75 × 48 × 55 mm with a 18 mm trigger cutout. Print in PETG with 2.4 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design an 18V LXT impact holster 75×48×55 mm, 18 mm trigger cutout, two 4.5 mm holes, 2.4 mm PETG.
The LXT battery wall mount does not hold the tool. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
iPhone 15 stroller handlebar phone mount clampA two-piece clamp that bolts around a stroller or buggy handlebar between 25 and 32 mm in diameter and carries an iPhone 15 (147.6 x 71.6 x 7.8 mm) where you…Philips Hue motion sensor corner mount bracketA wedge that lets the Philips Hue motion sensor sit in the corner of a room, where its field of view covers the whole space.Gillette Fusion razor wall holder with adhesive padA wall holder that grips a Gillette Fusion, ProGlide or Harry's Truman handle by its neck so the cartridge hangs in the air and dries instead of rusting on t…Starlink Mini window suction mountA window mount that holds a Starlink Mini (about 298 × 259 × 39 mm) on two 80 mm suction cups so you can park-and-stay without drilling.Dyson V12 Detect crevice wand clipA clip that snaps the longer V12 Detect crevice tool onto the slim wand, 38 × 26 × 16 mm with a 30 mm tool saddle and a 34 mm wand snap.Wall bracket for a 32 mm pipeA two-screw saddle bracket that holds a 32 mm round pipe or tube flush against a wall, useful for waste pipes, indoor garden lines or a curtain-weight dowel.