1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Logitech Brio 100 monitor-riser clip
This is not a fixed STL. SpeakCAD generates the logitech brio 100 monitor-riser clip to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a logitech brio 100 monitor-riser clip is
A clip that parks a Brio 100 (about 70 × 30 × 30 mm) on a 4–32 mm monitor riser so the camera sits above a laptop lid. The well is 72 × 32 mm with a 12 mm USB-C slot. Print in PETG with 1.6 mm walls.
The Brio 4K thin-bezel clip is for a different camera. In SpeakCAD you measure the riser, preview the clip in the browser for free, then download the STL.
Example prompt
Create a Brio 100 riser clip, 72×32 mm well, clamp for 4–32 mm edges, 12 mm USB-C slot, 1.6 mm PETG.
People also search
brio 100 clip stllogitech brio 100 mount 3d printbrio 100 monitor holderbrio 100 webcam clip 3d model
Questions people ask about a logitech brio 100 monitor-riser clip
A clip that parks a Brio 100 (about 70 × 30 × 30 mm) on a 4–32 mm monitor riser so the camera sits above a laptop lid. The well is 72 × 32 mm with a 12 mm USB-C slot. Print in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Brio 100 riser clip, 72×32 mm well, clamp for 4–32 mm edges, 12 mm USB-C slot, 1.6 mm PETG.
The Brio 4K thin-bezel clip is for a different camera. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Airspy HF+ Discovery desk standA stand that holds an HF+ Discovery at 20 degrees with SMA clearance and a 14 mm USB slot.HomePod 2nd gen bookshelf isolation standA 20 mm isolation stand under a full-size HomePod 2nd gen (about 168 mm diameter, 142 mm tall) so the bass does not buzz a bookshelf.IKEA LACK TV-unit cord combA comb that sits on the back rail of a LACK TV unit (145 cm) and separates HDMI, power and optical so they do not knot behind the stand.Under-desk headphone holder with screw mountA curved hanger that screws to the underside of a desk so headphones hang within reach.Elgato Stream Deck XL low-profile angled standA single-piece stand that replaces the tall stock cradle of the Elgato Stream Deck XL with a slimmer 30 degree wedge.ZSA Moonlander tenting legs setA set of four screw-in tenting legs for a ZSA Moonlander that replace the stock 8 mm feet with 15, 25 and 40 mm options.