1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
KitchenAid pouring-shield wall hook
This is not a fixed STL. SpeakCAD generates the kitchenaid pouring-shield wall hook to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a kitchenaid pouring-shield wall hook is
A hook that hangs a KitchenAid pouring shield (about 220 mm across) so it is not the cracked thing at the back of a cupboard. The saddle is 8 mm and two 4.5 mm holes sit on 40 mm centres. Print in PETG with 2 mm walls.
The attachment holder rack is for hubs, not the shield. In SpeakCAD you confirm tilt-head vs bowl-lift, preview the hook in the browser at no cost, then download the STL.
Example prompt
Design a KitchenAid pouring-shield hook, 8 mm saddle, two 4.5 mm holes on 40 mm centres, 2 mm PETG.
People also search
kitchenaid pouring shield hook stlkitchenaid splash shield holder 3d printpouring shield wall mountkitchenaid shield hook 3d model
Questions people ask about a kitchenaid pouring-shield wall hook
A hook that hangs a KitchenAid pouring shield (about 220 mm across) so it is not the cracked thing at the back of a cupboard. The saddle is 8 mm and two 4.5 mm holes sit on 40 mm centres. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a KitchenAid pouring-shield hook, 8 mm saddle, two 4.5 mm holes on 40 mm centres, 2 mm PETG.
The attachment holder rack is for hubs, not the shield. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
KitchenAid Artisan bowl-lift splash guardA 220 mm splash ring that sits on a 4.8 L Artisan bowl-lift bowl with a 30 mm pour gap and a 6 mm beater clearance.Dyson Airwrap Complete Long standA counter stand that holds a Dyson Airwrap Complete Long (about 41 mm handle, 270 mm long) barrel-up so the cord does not yank it over.Vitamix Explorian E310 blade-cover standA stand that holds an E310 container (about 180 mm across the blade) upside down with a 40 mm blade clearance so the jar dries without dulling the blade on t…Cutlery tray sized to your kitchen drawerA five-section cutlery tray built to the exact internal width and depth of a kitchen drawer so it does not slide about or waste space at the sides.Bin bag roll dispenser for cabinet doorA slim box that holds a roll of bin bags inside a cabinet door and feeds one out through a slot.KitchenAid stand mixer bowl cover lid with pour chuteA splash lid for the 4.8 litre bowl of a KitchenAid Artisan tilt-head mixer that clips onto the rim and lets you add flour through a chute while the beater r…