1
Replacement parts
KitchenAid mixer speed lever knob
This is not a fixed STL. SpeakCAD generates the kitchenaid mixer speed lever knob to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a KitchenAid speed lever knob, 15 mm diameter 20 mm long, 3 mm slot, ribbed grip, PETG.
What a kitchenaid mixer speed lever knob is
A replacement end knob for the speed control lever of KitchenAid stand mixers, the small plastic cap that cracks or falls off the metal lever. It is about 15 mm across and 20 mm long with a 3 mm slot, 12 mm deep, that presses onto the lever blade with a 0.1 mm interference, and a ribbed grip. Print on its side in PETG so the slot walls are strong.
The head-lock lever on tilt-head mixers is a different shape and will not take this cap. Open the ready-made knob free in SpeakCAD, adjust the slot to your lever in the chat or the viewer, then download the STL.
People also search
kitchenaid speed lever knobkitchenaid mixer lever replacementkitchenaid knob 3d printkitchenaid speed control stl
Questions people ask about a kitchenaid mixer speed lever knob
A replacement end knob for the speed control lever of KitchenAid stand mixers, the small plastic cap that cracks or falls off the metal lever. It is about 15 mm across and 20 mm long with a 3 mm slot, 12 mm deep, that presses onto the lever blade with a 0.1 mm interference, and a ribbed grip. Print on its side in PETG so the slot walls are strong.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a KitchenAid speed lever knob, 15 mm diameter 20 mm long, 3 mm slot, ribbed grip, PETG.
The head-lock lever on tilt-head mixers is a different shape and will not take this cap. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Thule ProRide wheel-strap hookA hook that parks a ProRide wheel strap (about 20 mm webbing) on the tray so it does not slap the car.Voron 2.4 panel clip for 3 mm panelsA panel clip that holds the 3 mm side, rear and top panels of a Voron 2.4 against the 2020 frame, for replacing broken clips or re-panelling a build.Dyson V8 bin latch catchA replacement catch for the bin door of a Dyson V8, the small hook that breaks and lets the bin fall open.Vacuum cleaner hose end cuffThe cuff where a vacuum hose meets the wand or floor head cracks from years of twisting, and once it splits the suction leaks away.Bambu Lab X1C purge wiper replacement bladeA replacement for the small nozzle wiper blade at the rear of the Bambu Lab X1 Carbon and P1S, which wears a groove after a few hundred hours and stops clean…Framework Laptop 16 expansion-bay coverA blank cover for a Framework 16 expansion bay when the GPU module is out, 150 × 20 × 8 mm with the official clips.