1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
KitchenAid flex-edge beater drying stand
This is not a fixed STL. SpeakCAD generates the kitchenaid flex-edge beater drying stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a kitchenaid flex-edge beater drying stand is
A stand that holds a KitchenAid flex-edge beater (about 140 mm across the hub) upright so the silicone edge dries after washing. The peg is 16 mm and 50 mm tall on a 80 × 60 mm base with a 4 mm drip lip. Print in PETG with 2 mm walls.
The sausage-tube rack and splash guard are different attachments. In SpeakCAD you add the wire whip, preview the stand in the browser without paying, then download the STL.
Example prompt
Model a KitchenAid flex-edge beater stand 80×60×54 mm, 16 mm peg 50 mm tall, 4 mm drip lip, 2 mm PETG.
People also search
kitchenaid beater stand stlflex edge beater holder 3d printkitchenaid beater drying rackkitchenaid attachment stand 3d model
Questions people ask about a kitchenaid flex-edge beater drying stand
A stand that holds a KitchenAid flex-edge beater (about 140 mm across the hub) upright so the silicone edge dries after washing. The peg is 16 mm and 50 mm tall on a 80 × 60 mm base with a 4 mm drip lip. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a KitchenAid flex-edge beater stand 80×60×54 mm, 16 mm peg 50 mm tall, 4 mm drip lip, 2 mm PETG.
The sausage-tube rack and splash guard are different attachments. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
Roborock S8 Pro Ultra mop drying rackA rack that stands two S8 Pro Ultra mop pads (about 150 × 70 mm) on edge after a wash so they dry before the next dock cycle.Snap-close chip bag sealing clipsA set of bag clips that seal crisps, cereal and frozen vegetables shut.Custom shape cookie cutter with stampA cookie cutter made from any outline you describe, with a sharp cutting edge on one side and a wide pressing flange on the other so dough releases cleanly.Vitamix tamper holder clip for the container baseA clip that holds the Vitamix tamper upright next to the motor base so it is never rolling around a drawer or lying wet on the counter.Fellow Stagg EKG drip-tray gridA 90 × 70 × 6 mm grid that sits on a Stagg EKG base and lets drips fall through 4 mm slots instead of staining the metal.Dyson Airwrap i.d. barrel wall rackA wall rack that parks the four Airwrap i.d.