1
Everyday fixes
Keystone surface mount box (2 port)
This is not a fixed STL. SpeakCAD generates the keystone surface mount box (2 port) to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a 2-port keystone surface box 60×40×30 mm, two 14.9×19.5 mm openings with 1.5 mm latch ledge, 10 mm cable knock-out, two 4 mm holes.
What a keystone surface mount box (2 port) is
A surface box that holds two keystone jacks on a wall or skirting board where you cannot cut into plaster. The box is 60 × 40 × 30 mm, the two openings are about 14.9 × 19.5 mm with a 1.5 mm latch ledge, a 10 mm knock-out takes the cable, and the base has two 4 mm holes. Print in PLA, face down.
Keystone brands differ slightly, so test one jack before printing more. Open the ready-made box in SpeakCAD for free, change the port count in the viewer or the chat, then download the STL.
People also search
keystone surface box stlkeystone jack box 3d printethernet wall box 2 portrj45 surface mount box 3d model
Questions people ask about a keystone surface mount box (2 port)
A surface box that holds two keystone jacks on a wall or skirting board where you cannot cut into plaster. The box is 60 × 40 × 30 mm, the two openings are about 14.9 × 19.5 mm with a 1.5 mm latch ledge, a 10 mm knock-out takes the cable, and the base has two 4 mm holes. Print in PLA, face down.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a 2-port keystone surface box 60×40×30 mm, two 14.9×19.5 mm openings with 1.5 mm latch ledge, 10 mm cable knock-out, two 4 mm holes.
Keystone brands differ slightly, so test one jack before printing more. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
Garage parking stop wheel chock for Tesla Model YA low parking stop that screws to the garage floor so the front wheel of a Tesla Model Y or any similar SUV settles into the same spot every time, leaving ro…AirTag saddle-rail stealth coverA cover that looks like a rail bumper and holds an AirTag between 7 mm rails with 1 mm TPU lips.AirTag hidden bike bottle-cage mountA 40 × 36 × 12 mm plate that hides an AirTag under a bottle cage so a thief does not see a hanging tag.Shimano STEPS E8000 display sun hoodA 35 mm hood that clips onto a STEPS E8000 display (about 60 × 45 mm) so the screen stays readable at noon.Clip-on rear fender for seatpostA seatpost fender stops road spray soaking your back on wet commutes and clips on without tools.Clothes hanger connector clipsHanger connectors let a second hanger dangle from the first, doubling closet space for shirts and trousers.