1
Replacement parts
Kenwood Chef slow outlet cover
This is not a fixed STL. SpeakCAD generates the kenwood chef slow outlet cover to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a Kenwood Chef slow outlet cover, 60 mm diameter, two bayonet lugs, grip ridge, PETG.
What a kenwood chef slow outlet cover is
A replacement cover for the front slow-speed outlet of Kenwood Chef mixers, the twist-on cap that keeps flour out of the drive. It is about 60 mm across with two bayonet lugs that turn into the outlet, a 2 mm skirt, and a raised grip bar across the face. Print face down in PETG; measure the outlet first, because Chef, Chef XL and Titan generations differ by a few millimetres.
The high-speed outlet on top is smaller and the Kenwood kMix uses a different system. Open the ready-made cover free in SpeakCAD, change its diameter and lug angle in the viewer or the chat, then download the STL.
People also search
kenwood chef outlet coverkenwood mixer cover replacementkenwood cover 3d printkenwood chef cap stl
Questions people ask about a kenwood chef slow outlet cover
A replacement cover for the front slow-speed outlet of Kenwood Chef mixers, the twist-on cap that keeps flour out of the drive. It is about 60 mm across with two bayonet lugs that turn into the outlet, a 2 mm skirt, and a raised grip bar across the face. Print face down in PETG; measure the outlet first, because Chef, Chef XL and Titan generations differ by a few millimetres.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a Kenwood Chef slow outlet cover, 60 mm diameter, two bayonet lugs, grip ridge, PETG.
The high-speed outlet on top is smaller and the Kenwood kMix uses a different system. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA KALLAX insert-drawer stopA stop that keeps a KALLAX drawer insert (33 cm cube) from being pulled out of the cube.Sovol SV06 filament guide with 608 bearingA filament guide for the top of a Sovol SV06 that routes filament from the spool holder to the extruder over a 608 bearing (22 × 8 × 7 mm) so it no longer ru…Samsung washing machine softener siphon capA replacement siphon cap for the fabric softener compartment of Samsung front-loader detergent drawers, the small cap that goes missing and makes softener po…Eurorack 4HP blank panelA blank panel that closes an empty 4HP gap in a Eurorack case.Yeti Rambler MagSlider lid slider replacementThe magnetic slider on a Yeti Rambler 20 oz or 30 oz tumbler lid is the part that goes through the dishwasher, gets lost, and costs almost as much as a new lid.Nanoleaf Shapes 10 mm corner spacerA 10 mm spacer that sits behind a Shapes panel so a corner that is out of plane still clicks.