1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Replacement parts
IKEA PAX BERGSBO door soft bump
This is not a fixed STL. SpeakCAD generates the ikea pax bergsbo door soft bump to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea pax bergsbo door soft bump is
A bump that sits on a PAX BERGSBO panel door so two sliding or hinged doors do not clap. The pad is 18 × 12 × 6 mm with a 3 mm peg for the official hole. Print four in TPU.
The BESTÅ glass-door bump is a different hole. Describe hinged vs sliding in SpeakCAD, preview a bump in the browser for free, then download the STL.
Example prompt
Create a PAX BERGSBO door bump 18×12×6 mm with a 3 mm peg, TPU, set of four.
People also search
pax bergsbo bump stlikea pax door bumper 3d printbergsbo soft close padpax door bump 3d model
Questions people ask about a ikea pax bergsbo door soft bump
A bump that sits on a PAX BERGSBO panel door so two sliding or hinged doors do not clap. The pad is 18 × 12 × 6 mm with a 3 mm peg for the official hole. Print four in TPU.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a PAX BERGSBO door bump 18×12×6 mm with a 3 mm peg, TPU, set of four.
The BESTÅ glass-door bump is a different hole. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA TROFAST frame 35 mm caster riserA 35 mm riser that adds a 40 mm caster under a TROFAST frame so the unit rolls to the next room.IKEA POÄNG ottoman felt glidesGlides that replace worn POÄNG ottoman feet (about 28 × 18 mm) so the stool slides without scratching.Sliding wardrobe door roller carriageSliding wardrobe doors ride on small roller carriages that split along the axle after years of use, making the door drop and scrape.Kuat NV bike rack wheel tray end capThe plastic caps on the ends of Kuat NV and Sherpa wheel trays crack in the cold and let water into the extrusion.Stryd foot-pod shoe-clip spareA spare clip that holds a Stryd running pod (about 28 × 25 × 10 mm) on a lacing pattern 8–14 mm wide.Roomba j9+ cliff-sensor shimA 1.2 mm shim that sits under a j9+ cliff sensor so dark hardwood is not read as a stair.