1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
IKEA KALLAX cube 50 mm cable pass
This is not a fixed STL. SpeakCAD generates the ikea kallax cube 50 mm cable pass to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea kallax cube 50 mm cable pass is
A 50 mm pass-through for a KALLAX cube used as a printer or game stand so power can exit the back without a raw hole. The flange is 62 mm and the barrel is 16 mm. Print in PETG with 1.6 mm walls.
The 33 cm insert divider and 40 mm caster riser are different KALLAX parts. Tell SpeakCAD cube vs 2×2, preview the pass in the browser without paying, then download the STL.
Example prompt
Model a KALLAX 50 mm cable pass, 62 mm flange, 16 mm barrel, 1.6 mm PETG.
People also search
kallax cable pass stlikea kallax grommet 3d printkallax 50mm cable holekallax cube cable cover 3d model
Questions people ask about a ikea kallax cube 50 mm cable pass
A 50 mm pass-through for a KALLAX cube used as a printer or game stand so power can exit the back without a raw hole. The flange is 62 mm and the barrel is 16 mm. Print in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a KALLAX 50 mm cable pass, 62 mm flange, 16 mm barrel, 1.6 mm PETG.
The 33 cm insert divider and 40 mm caster riser are different KALLAX parts. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
IKEA ALEX desk 80 mm round grommetAn 80 mm round grommet for a drilled ALEX desk top so monitor and laptop cables drop into the drawer stack.Framework 16 speaker-module stand feetFeet that lift a Framework 16 8 mm when the speaker modules are in so the down-firing drivers clear a desk.Samsung Galaxy Z Flip 6 desk stand for Flex modeA desk dock for the Samsung Galaxy Z Flip 6 that cradles the lower half so the phone sits in Flex mode with the top screen angled toward you for video calls…iPad mini 7 bedside reading standA bedside stand that holds an iPad mini 7 (about 195 × 135 × 6.3 mm) at 40 degrees in portrait with a 14 mm USB-C slot and a 8 mm lip so a Folio case does no…SSL 2 MKII monitor-riser gap fillerA 20 mm filler that lets an SSL 2 MKII sit under a monitor riser with the knobs still reachable, 300 × 40 × 20 mm in two halves.MacBook Pro 14 M4 HDMI hub under-standA 22 mm shelf that sits under a 14-inch MacBook Pro M4 (about 15.5 mm closed, 312 mm wide) and parks a 6-port HDMI/SD hub so the left Thunderbolt ports stay…