1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
IKEA KALLAX 2×2 anti-tip bracket
This is not a fixed STL. SpeakCAD generates the ikea kallax 2×2 anti-tip bracket to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea kallax 2×2 anti-tip bracket is
A bracket that ties a 2×2 KALLAX (77 × 77 cm) to the wall through the existing back-panel holes. The plate is 80 × 40 × 4 mm with two 4.5 mm wall holes and two 5 mm KALLAX holes. Print in PETG with 3 mm walls.
The BILLY anti-tip is a different spacing. In SpeakCAD you confirm 2×2 vs 4×4, preview the bracket in the browser for free, then download the STL.
Example prompt
Create a KALLAX 2×2 anti-tip bracket 80×40×4 mm, two 4.5 mm wall holes, two 5 mm KALLAX holes, 3 mm PETG.
People also search
kallax anti tip stlikea kallax 2x2 wall bracket 3d printkallax safety bracketkallax tip restraint 3d model
Questions people ask about a ikea kallax 2×2 anti-tip bracket
A bracket that ties a 2×2 KALLAX (77 × 77 cm) to the wall through the existing back-panel holes. The plate is 80 × 40 × 4 mm with two 4.5 mm wall holes and two 5 mm KALLAX holes. Print in PETG with 3 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a KALLAX 2×2 anti-tip bracket 80×40×4 mm, two 4.5 mm wall holes, two 5 mm KALLAX holes, 3 mm PETG.
The BILLY anti-tip is a different spacing. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Philips Hue Play light bar monitor clip mountA clip that hangs a Philips Hue Play light bar on the back of a monitor without the stock adhesive feet.Furbo dog camera wall mount bracketA bracket that lifts a Furbo Dog Camera or Furbo 360 off the floor and onto the wall so the treat tosser clears the sofa and curious dogs cannot knock it over.25 mm French-cleat cordless-drill holderA French-cleat cradle for an 18V drill with a 50 mm handle saddle and a 20 mm battery rest, cut for a 25 mm cleat.Dyson V10 Animal mini-motorhead clipA clip that hangs the V10 Animal mini motorhead on the wand so pet stairs are not a two-trip job.L-shaped shelf bracket, 150 mm reachA simple right-angle bracket for a light shelf up to about 150 mm deep, holding books, small speakers or plants in a hallway.Quad Lock wall mount plate for shower or workshopA flat plate with a Quad Lock style twist-lock recess so any phone in a Quad Lock case snaps onto a shower wall, a workshop board or the side of a fridge.