1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Replacement parts
IKEA IVAR 6 mm shelf-pin replacement
This is not a fixed STL. SpeakCAD generates the ikea ivar 6 mm shelf-pin replacement to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea ivar 6 mm shelf-pin replacement is
A 6 mm pin that replaces a lost IVAR metal pin so a pine shelf sits level in the 30 or 50 cm side unit. The pin is 14 mm long with a 10 mm head. Print four in PETG standing on the head.
BILLY and PAX pins are 5 mm. Tell SpeakCAD how many you need, preview a pin in the browser for free, then download the STL.
Example prompt
Create an IVAR 6 mm shelf pin 14 mm long with a 10 mm head, PETG, set of four.
People also search
ivar shelf pin stlikea ivar 6mm peg 3d printivar pin replacementivar shelf peg 3d model
Questions people ask about a ikea ivar 6 mm shelf-pin replacement
A 6 mm pin that replaces a lost IVAR metal pin so a pine shelf sits level in the 30 or 50 cm side unit. The pin is 14 mm long with a 10 mm head. Print four in PETG standing on the head.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create an IVAR 6 mm shelf pin 14 mm long with a 10 mm head, PETG, set of four.
BILLY and PAX pins are 5 mm. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Thule EasyFold wheel-tray end capA replacement end cap for a Thule EasyFold wheel tray, 40 × 25 mm with the stock 4 mm rib.IKEA SMÅSTAD drawer-stop clipA clip that keeps a SMÅSTAD kids drawer from being pulled all the way out, 22 × 14 × 10 mm with a 3 mm lip that grabs the official runner.DeWalt TOUGHSYSTEM DS150 latch guardA guard that sits over a DS150 metal latch so it does not catch on a truck liner.Cordless drill battery latch buttonThe spring-loaded latch button that locks a battery pack into a cordless drill wears out or snaps its tab, so the pack slides off mid-job.CamelBak bite valve dust cover cap replacementThe hinged dust cover on a CamelBak Big Bite valve or Crux tube gets chewed off or lost on the first ride, leaving the valve to collect trail grit.ecobee Smart Thermostat Enhanced wall shimA 6–12 mm stepped shim that sits behind an ecobee Smart Thermostat Enhanced (about 109 mm round) so the unit sits flush on a tiled wall.