1
Replacement parts
Creality K1 Max purge waste bin
This is not a fixed STL. SpeakCAD generates the creality k1 max purge waste bin to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a purge waste bin for a Creality K1 Max, 140×100×100 mm, 50×30 mm angled inlet, rear hook lip, 2 mm walls.
What a creality k1 max purge waste bin is
A waste bin for the purge chute on the back of a Creality K1 Max (435 × 462 × 526 mm), so strands from nozzle wipes and CFS colour changes drop into a box, not behind the desk. The bin is 140 × 100 × 100 mm with a 50 × 30 mm angled inlet, a rear lip that hooks the printer back panel and 2 mm walls. Print in PETG, open side up.
The K1 and K1C chute sits at a different height, so their bin does not reach it. Open the model in SpeakCAD for free, move the inlet or resize the bin in the viewer or the chat, then download the STL.
People also search
k1 max poop chute stlk1 max purge bincreality k1 max waste bin 3d printk1 max poop bucket
Questions people ask about a creality k1 max purge waste bin
A waste bin for the purge chute on the back of a Creality K1 Max (435 × 462 × 526 mm), so strands from nozzle wipes and CFS colour changes drop into a box, not behind the desk. The bin is 140 × 100 × 100 mm with a 50 × 30 mm angled inlet, a rear lip that hooks the printer back panel and 2 mm walls. Print in PETG, open side up.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a purge waste bin for a Creality K1 Max, 140×100×100 mm, 50×30 mm angled inlet, rear hook lip, 2 mm walls.
The K1 and K1C chute sits at a different height, so their bin does not reach it. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Salomon Quicklace cord lock replacementSalomon Speedcross, Sense Ride and XA Pro trail shoes use a Quicklace system with a small two-hole cord lock that eventually cracks or loses its spring.Thule EasyFold wheel-tray end capA replacement end cap for a Thule EasyFold wheel tray, 40 × 25 mm with the stock 4 mm rib.IKEA KALLAX insert-drawer stopA stop that keeps a KALLAX drawer insert (33 cm cube) from being pulled out of the cube.Voron 2.4 door handle for 3 mm panelsA door handle for the 3 mm acrylic or polycarbonate front doors of a Voron 2.4.LG washing machine detergent drawer handleA replacement front handle for LG front-loader detergent drawers, whose pull breaks off the drawer face.Eurorack 4HP blank panelA blank panel that closes an empty 4HP gap in a Eurorack case.