Adapters & couplers

IKEA Besta cable pass-through grommet for a 60 mm hole

A two-part grommet that finishes a hole drilled through the back or shelf of an IKEA Besta TV bench so HDMI and power cables pass through cleanly without chewed melamine showing. It fits a 60 mm hole cut with a standard Forstner or hole saw, with a flange 70 mm in diameter and 2 mm thick, a sleeve 59.5 mm across for a 0.25 mm fit, and a snap cap with a 25 mm cable slot that closes the opening. Six 1 mm ribs on the sleeve grip the 18 mm panel. Print both parts flange down in PETG with 1.6 mm walls; no glue is needed.

Besta backs and shelves differ in thickness from Kallax or Malm panels, and hole saw sizes vary, so a grommet generated to your panel and hole fits first time. In SpeakCAD you give the hole diameter and panel thickness, preview the grommet in the browser at no cost, add a brush insert in the chat and download the STL.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Design a two-part cable grommet for a 60 mm hole in an 18 mm IKEA Besta panel: a sleeve 59.5 mm outer diameter and 20 mm long with six 1 mm grip ribs and a 70 mm flange 2 mm thick, plus a snap-in cap with a 25 mm wide cable slot, 1.6 mm walls throughout.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More adapters & couplers

Bosch GKS 190 circular saw dust port adapter 35 mmAn adapter that clips onto the chip ejection chute of a Bosch GKS 190 or GKS 18V-57 circular saw and gives it a 35 mm round spigot for a workshop vacuum hose.Peak Design Capture clip backing plate for thin strapsA spacer plate that sits behind a Peak Design Capture V3 clip so it clamps firmly onto thin backpack straps, seatbelt-style webbing or a 20 mm MOLLE row that…PVC pipe adapter, 40 mm to 50 mmA reducing coupler that connects a 40 mm PVC pipe to a 50 mm pipe for low-pressure drains, dust collection or a garden gravity feed.Rigid shaft coupler, 5 mm to 8 mmA rigid coupling that joins a 5 mm motor shaft to an 8 mm lead screw or output shaft in low-torque projects such as small linear stages or slow turntables.MagSafe charger puck to 1/4-20 tripod mount adapterA holder that turns an Apple MagSafe charger puck (56 mm diameter, about 5.5 mm thick) into a magnetic tripod head, so an iPhone 16 Pro snaps onto any tripod…Nalgene 32 oz bottle cage adapter for bikesA 32 oz Nalgene wide mouth is 89 mm across, far too fat for the 74 mm cages on a bikepacking or touring frame.

Make your ikea besta cable pass-through grommet for a 60 mm hole now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.