Adapters & couplers

Rokform RokLock to MagSafe ring adapter disc

A disc that twists into a Rokform RokLock mount and presents a MagSafe magnet ring on its face, so an iPhone 16 or any MagSafe phone without a Rokform case can still use the Rokform bike or car mount. The back copies the RokLock twist-lock plate, and the front has a 56.5 mm pocket 1.8 mm deep for a stick-on MagSafe ring such as an ESR HaloLock. The disc is 62 mm across and 7 mm thick, prints flat, and has a 2 mm lip so the ring sits flush with the phone back.

Rokform has several plate generations and the twist lugs must be exact for the lock to seat. In SpeakCAD you give the lug measurements from your mount and the ring you bought, preview the disc free in the browser, refine the fit in the chat, then download the STL.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Design a 62 mm diameter, 7 mm thick adapter disc with a Rokform RokLock style twist boss on the back with two 10 mm lugs on a 34 mm circle, and a 56.5 mm diameter, 1.8 mm deep pocket for a stick-on MagSafe ring on the front with 0.2 mm clearance.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More adapters & couplers

Dyson V11 wand to 32 mm standard vacuum tool adapterAn adapter that clicks onto the wand or motor body of a Dyson V11, V10 or V15 and presents a standard 32 mm spigot so universal crevice tools, brush heads an…Sony A7 IV Arca-Swiss plate with anti-twist lipA camera-specific Arca-Swiss plate for the Sony A7 IV, A7R V and A7C II that cannot rotate on the 1/4-20 tripod socket because a 4 mm lip hooks the rear edge…Dust extraction adapter, 35 mm tool port to 58 mm hoseA tapered adapter that connects the small 35 mm dust port on a sander or router to the 58 mm hose of a shop vacuum, so chips end up in the bin instead of on…Speaker stand pole adapter, 35 mm socketA cup that fits over a 35 mm speaker stand pole and provides a flat top with screw holes for a monitor speaker or small light that lacks a pole socket.GoPro mount to Garmin quarter-turn adapter for bike lightsA puck that lets a bike light with a GoPro-style two-finger foot, such as a Knog Blinder, Exposure Strada or Magicshine, hang from a spare Garmin quarter-tur…Thule roof rack T-track adapter for bike carrierThule WingBar and WingBar Evo bars have a 20 x 20 mm T-track along the top, and older bike carriers, ski racks or DIY kayak saddles that clamp around a squar…

Make your rokform roklock to magsafe ring adapter disc now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.