1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Philips Hue Iris desk cable channel
This is not a fixed STL. SpeakCAD generates the philips hue iris desk cable channel to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a philips hue iris desk cable channel is
A channel that hides the Hue Iris power brick (about 70 × 40 × 25 mm) and USB-C lead behind a desk so the lamp sits clean on a shelf. The trough is 80 × 44 × 28 mm with a 8 mm cable slot. Print in PETG with 1.6 mm walls.
The Bloom clip is for under a shelf. Describe brick vs USB-C Iris in SpeakCAD, preview the channel in the browser for free, then download the STL.
Example prompt
Create a Hue Iris cable channel 80×44×28 mm, 8 mm cable slot, 1.6 mm PETG.
People also search
hue iris cable channel stlphilips hue iris brick holder 3d printhue iris cable tidyiris lamp cable cover 3d model
Questions people ask about a philips hue iris desk cable channel
A channel that hides the Hue Iris power brick (about 70 × 40 × 25 mm) and USB-C lead behind a desk so the lamp sits clean on a shelf. The trough is 80 × 44 × 28 mm with a 8 mm cable slot. Print in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Hue Iris cable channel 80×44×28 mm, 8 mm cable slot, 1.6 mm PETG.
The Bloom clip is for under a shelf. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Kindle Scribe 2025 folio desk easelA low easel that holds a Kindle Scribe (2025, about 230 × 196 × 6 mm) in its folio at 25 degrees for note-taking, with a 198 mm ledge and a 10 mm pen well al…Airspy HF+ Discovery desk standA stand that holds an HF+ Discovery at 20 degrees with SMA clearance and a 14 mm USB slot.HomePod 2nd gen bookshelf isolation standA 20 mm isolation stand under a full-size HomePod 2nd gen (about 168 mm diameter, 142 mm tall) so the bass does not buzz a bookshelf.IKEA MALM desk under-cable trayA tray that screws under a MALM desk (about 140 or 151 cm) and holds a power strip plus laptop brick so cables are not on the floor.Under-desk headphone holder with screw mountA curved hanger that screws to the underside of a desk so headphones hang within reach.Elgato Stream Deck XL low-profile angled standA single-piece stand that replaces the tall stock cradle of the Elgato Stream Deck XL with a slimmer 30 degree wedge.