GoPro motorcycle handlebar mount for 22.2 mm bars
A handlebar clamp for 22.2 mm motorcycle bars that carries a GoPro on a three-prong mount (prongs about 3 mm thick, 5 mm bolt hole), set 30 mm above the bar to clear the mirrors and controls. It closes with two M5 bolts, a 1 mm TPU strip stops it rotating, and the prongs can face forward or sideways. Print the halves flat in PETG or ASA. Describe your measurements and SpeakCAD builds it with AI (credits), then download STL, 3MF or sliced G-code.No ready-made model for this part yet
Sign in and SpeakCAD builds it from the prompt below (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime). Want to try the editor first? The live demo is free, no account.Adjust
Change its numbers in the viewer for free, or ask the AI for a change in the chat (2 credits for a small change, 1 for a quick edit, 3 for a redesign; the first 3 small changes are free on a plan).Example prompt
Model a GoPro motorcycle handlebar mount, 22.2 mm clamp with two M5 bolts, 1 mm TPU strip, three-prong GoPro mount 30 mm above the bar.
Fit notes
Fat bars are 28.6 mm at the clamp, so change the bore in the chat.
Questions people ask about a GoPro motorcycle handlebar mount for 22.2 mm bars
A handlebar clamp for 22.2 mm motorcycle bars that carries a GoPro on a three-prong mount (prongs about 3 mm thick, 5 mm bolt hole), set 30 mm above the bar to clear the mirrors and controls. It closes with two M5 bolts, a 1 mm TPU strip stops it rotating, and the prongs can face forward or sideways. Print the halves flat in PETG or ASA.
There is no ready-made model for this part yet. Click Build it with AI and sign in: the example prompt on this page is filled in, and SpeakCAD builds the part from it in your browser (4 credits for the part on a plan, its first 3 small changes free). Change any number in the viewer for free, then download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime.
SpeakCAD builds it to your measurements from the example prompt on this page: the part uses 4 credits on a plan, its first 3 small changes free (3 without a plan), and a small change after them 2, then the STL or 3MF download is included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime. To try the editor before paying, the live demo is free, no account.
A shared STL is modelled for someone else's measurements. SpeakCAD builds this part to the millimetres you give it (AI requests use credits), so the file you download is sized for the part you actually own.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.