1
Brackets & mounts
GL.iNet Beryl AX travel router mount
This is not a fixed STL. SpeakCAD generates the gl.inet beryl ax travel router mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Beryl AX mount, 121×35 mm cradle open at the port end, two 25 mm strap slots, two 4 mm holes, 2 mm PETG.
What a gl.inet beryl ax travel router mount is
A strap-on mount for a GL.iNet Beryl AX (GL-MT3000, about 120 × 83 × 34 mm) that holds it on a desk leg, van wall or hotel TV cable. The cradle is 121 × 35 mm with 0.5 mm clearance, open at the port end, with two 25 mm hook-and-loop strap slots and two 4 mm screw holes. Print in PETG, 2 mm walls.
The Slate AX and the Mango are different sizes. Open the ready-made mount in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
beryl ax mount stlgl-mt3000 holder 3d printgl.inet beryl ax wall mounttravel router mount 3d model
Questions people ask about a gl.inet beryl ax travel router mount
A strap-on mount for a GL.iNet Beryl AX (GL-MT3000, about 120 × 83 × 34 mm) that holds it on a desk leg, van wall or hotel TV cable. The cradle is 121 × 35 mm with 0.5 mm clearance, open at the port end, with two 25 mm hook-and-loop strap slots and two 4 mm screw holes. Print in PETG, 2 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Beryl AX mount, 121×35 mm cradle open at the port end, two 25 mm strap slots, two 4 mm holes, 2 mm PETG.
The Slate AX and the Mango are different sizes. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Intel NUC 13 Pro VESA bracketA VESA 75 and 100 bracket for an Intel NUC 13 Pro slim kit (117 × 112 × 37 mm) that holds it behind a monitor with the front ports reachable.Samsung Galaxy Z Fold 6 car vent mount foldedA vent cradle sized for the Samsung Galaxy Z Fold 6 when it is closed (153.5 x 68.1 x 12.1 mm), the thick form factor that most universal phone mounts cannot…UniFi U6 Lite ceiling tile adapter plateA plate that lets a Ubiquiti UniFi U6 Lite access point clip to a suspended ceiling grid instead of being screwed through a soft tile.Razer BlackShark V2 under desk headset hangerAn under-desk hanger for the Razer BlackShark V2 Pro and similar wide-band gaming headsets from SteelSeries Arctis Nova, HyperX Cloud III and Logitech G Pro X.Mac mini M4 Pro VESA 100 bracketA VESA 100 bracket that hangs a Mac mini M4 Pro behind a monitor, 130 × 130 mm plate with 20 mm standoffs and four M4 holes.Makita DHS680 track-adapter hookA hook that hangs a DHS680 circular saw on a French cleat or 4.5 mm hole pair by the track-adapter shoe.