1
Garden & outdoor
Gardena hose end parking clip for 13 mm hose
This is not a fixed STL. SpeakCAD generates the gardena hose end parking clip for 13 mm hose to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a hose parking clip, C-clip with 20 mm bore and 18 mm opening, 30 mm connector shelf below, two 4.5 mm screw holes, ASA.
What a gardena hose end parking clip for 13 mm hose is
A wall clip that parks the end of a 13 mm (1/2 inch) garden hose, which is about 19 mm outside, next to the tap. The C-clip has an 18 mm opening with a 20 mm bore so the hose snaps in, and a 30 mm shelf below catches the Gardena Original System connector so it hangs upright and does not drip onto the wall. Two 4.5 mm screw holes. Print in ASA or PETG for sun resistance.
19 mm (3/4 inch) hoses are about 26 mm outside and will not clip in. The model opens free in SpeakCAD; any millimetre can be changed in the viewer or the chat, then download the STL.
People also search
gardena hose holderhose end clip wallgarden hose clip stlgardena connector holder 3d print
Questions people ask about a gardena hose end parking clip for 13 mm hose
A wall clip that parks the end of a 13 mm (1/2 inch) garden hose, which is about 19 mm outside, next to the tap. The C-clip has an 18 mm opening with a 20 mm bore so the hose snaps in, and a 30 mm shelf below catches the Gardena Original System connector so it hangs upright and does not drip onto the wall. Two 4.5 mm screw holes. Print in ASA or PETG for sun resistance.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a hose parking clip, C-clip with 20 mm bore and 18 mm opening, 30 mm connector shelf below, two 4.5 mm screw holes, ASA.
19 mm (3/4 inch) hoses are about 26 mm outside and will not clip in. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More garden & outdoor
Drip irrigation tube stakeDrip lines wander out of pots unless pinned, and this stake holds 4 mm micro tubing right at the plant base.Compost aerator tool headA compost heap breaks down faster when air gets into the middle, and this aerator head turns a broom handle into a plunging turner.Bosch Kiox 300 display sun hoodA 40 mm hood that clips onto a Bosch Kiox 300 (about 60 × 45 mm) so the screen stays readable at noon.Hammerhead Karoo 3 out-front mountAn out-front for a Karoo 3 on 31.8 mm bars with the official 4-hole pattern and a 20 mm GoPro boss.Roborock Qrevo Master dock threshold rampA 22 mm ramp that lets a Qrevo Master climb a dock lip or room threshold the stock 20 mm Qrevo ramp does not clear.Rain barrel diverter for 68 mm round downpipeA rainwater diverter that fits into a cut 68 mm round downpipe, the UK and EU standard.