1
Organizers & storage
French cleat rack for 3/4 inch pipe clamps
This is not a fixed STL. SpeakCAD generates the french cleat rack for 3/4 inch pipe clamps to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a French cleat pipe clamp rack, five 29 mm wide 45 mm deep U slots on a 90 mm pitch, for 26.7 mm pipe, 45 degree cleat for 19 mm plywood.
What a french cleat rack for 3/4 inch pipe clamps is
A rack for pipe clamps on 3/4 inch black pipe (26.7 mm outside diameter). Five open U slots 29 mm wide and 45 mm deep sit on a 90 mm pitch so the cast jaws clear each other, and the fixed head rests on top. A 45 degree cleat fits 19 mm plywood; use two racks for long pipes. Print it on its back in PETG with 5 walls.
1/2 inch pipe is 21.3 mm across and swings in these slots; the chat can make a narrower version. Open the rack in SpeakCAD for free, change the slots in the viewer or the chat, then download the STL.
People also search
pipe clamp rackpipe clamp storage french cleat3/4 pipe clamp holder stlpipe clamp wall rack 3d print
Questions people ask about a french cleat rack for 3/4 inch pipe clamps
A rack for pipe clamps on 3/4 inch black pipe (26.7 mm outside diameter). Five open U slots 29 mm wide and 45 mm deep sit on a 90 mm pitch so the cast jaws clear each other, and the fixed head rests on top. A 45 degree cleat fits 19 mm plywood; use two racks for long pipes. Print it on its back in PETG with 5 walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a French cleat pipe clamp rack, five 29 mm wide 45 mm deep U slots on a 90 mm pitch, for 26.7 mm pipe, 45 degree cleat for 19 mm plywood.
1/2 inch pipe is 21.3 mm across and swings in these slots; the chat can make a narrower version. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Milwaukee Packout rolling-box handle hookA hook that clips onto the Packout rolling-box handle (about 30 mm) and holds a tape, knife or badge so they are not in a pocket.Joy-Con 2 desk organizer for four pairsAn upright organizer for eight Joy-Con 2 controllers (each about 116 mm long, 32 mm wide and 14 mm thick at the rail).French cleat screwdriver rack, 12 slotsA 12-slot French cleat screwdriver rack in two rows.Watch strap storage rack with numbered slotsA rack that stores spare smartwatch or quick-release straps flat and separated so silicone and leather bands do not stick together or curl.IKEA Pax clothes rail hook for bags and beltsA hook that hangs from the Komplement clothes rail inside an IKEA Pax wardrobe and holds handbags, belts, ties or a laundry bag without taking a hanger slot.IKEA SKÅDIS holder for Festool Domino tenonsA SKÅDIS box that holds Domino tenons in four labelled wells (4, 5, 6, 8 / 10 mm) with a 5 mm hook pair.