1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Framework Desktop under-desk tray
This is not a fixed STL. SpeakCAD generates the framework desktop under-desk tray to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a framework desktop under-desk tray is
A ventilated tray that clamps a Framework Desktop (about 190 × 190 × 75 mm) under a 15–36 mm desk so the rear exhaust stays open. The well is 194 × 194 × 30 mm with 12 mm vents and an M6 clamp pair. Print as two PETG halves.
The 13 vertical dock and 16 trays are laptops. In SpeakCAD you measure the desk, preview the tray in the browser at no cost, then download the STL.
Example prompt
Design a Framework Desktop under-desk tray 194×194×30 mm, 12 mm vents, clamp for 15–36 mm desks, two PETG halves, 2.4 mm walls.
People also search
framework desktop tray stlframework desktop under desk 3d printframework desktop holderframework desktop mount 3d model
Questions people ask about a framework desktop under-desk tray
A ventilated tray that clamps a Framework Desktop (about 190 × 190 × 75 mm) under a 15–36 mm desk so the rear exhaust stays open. The well is 194 × 194 × 30 mm with 12 mm vents and an M6 clamp pair. Print as two PETG halves.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Framework Desktop under-desk tray 194×194×30 mm, 12 mm vents, clamp for 15–36 mm desks, two PETG halves, 2.4 mm walls.
The 13 vertical dock and 16 trays are laptops. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Logitech MX Master 4 charging-puck standA stand that holds a Logitech MX Master 4 (about 126 × 84 × 51 mm) on its USB-C or wireless puck at 10 degrees so the thumb rest stays up.HackRF One PortaPack H2M standA stand that holds a HackRF + PortaPack H2M at 30 degrees with a 14 mm USB slot.iPad Pro 11-inch M4 Pencil charging standA stand that holds an 11-inch iPad Pro M4 (about 250 × 177 × 5.3 mm) at 60 degrees for StandBy and parks an Apple Pencil Pro on a 9 mm MagSafe saddle.IKEA ALEX monitor-riser 60 mm grommetA 60 mm round grommet for a homemade ALEX monitor riser so cables drop behind the drawers instead of over the front.Vertical laptop stand for closed-lid dockingA weighted-look holder that stores a closed laptop on its edge beside a monitor.Elgato Stream Deck MK.2 under-monitor mountA bracket that hangs an Elgato Stream Deck MK.2 below the bottom edge of a monitor so it stays in reach without a footprint on the desk.