1
Organizers & storage
Eurorack patch cable wall hanger
This is not a fixed STL. SpeakCAD generates the eurorack patch cable wall hanger to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Eurorack patch cable hanger, 20 slots 4 mm wide and 25 mm deep at 10 mm pitch, 210×40 mm back plate, two 4 mm countersunk holes.
What a eurorack patch cable wall hanger is
A wall hanger for 3.5 mm Eurorack patch cables sorted by length or colour. It has 20 slots 4 mm wide and 25 mm deep at 10 mm pitch, so the jack plugs (about 6 mm across) rest on top and the cables hang straight, on a 210 × 40 mm back plate with two 4 mm countersunk holes. Print on its back in PLA.
Thicker 1/4 inch instrument cables need 8 mm slots and more pitch; ask the chat. Open the ready-made model in SpeakCAD for free, change the slot count in the viewer or the chat, then download the STL.
People also search
eurorack patch cable holder stlpatch cable hanger 3d printmodular synth cable organizer3.5mm patch cable rack
Questions people ask about a eurorack patch cable wall hanger
A wall hanger for 3.5 mm Eurorack patch cables sorted by length or colour. It has 20 slots 4 mm wide and 25 mm deep at 10 mm pitch, so the jack plugs (about 6 mm across) rest on top and the cables hang straight, on a 210 × 40 mm back plate with two 4 mm countersunk holes. Print on its back in PLA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Eurorack patch cable hanger, 20 slots 4 mm wide and 25 mm deep at 10 mm pitch, 210×40 mm back plate, two 4 mm countersunk holes.
Thicker 1/4 inch instrument cables need 8 mm slots and more pitch; ask the chat. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
KitchenAid sausage-stuffer tube rackA rack that holds the three KitchenAid stuffer tubes (10, 19, 32 mm) upright by the hub so they dry.Milwaukee Packout crate bottle holderA holder that drops into a Packout crate and parks a 70 mm water bottle plus a 55 mm spray can so they do not tip when you roll.Handheld gaming PC shelf with three slotsA desk shelf that stands three handheld PCs upright on their bottom edge, sized for a Steam Deck OLED (49 mm deep), a Legion Go S (about 44 mm) and a ROG All…Gridfinity bin for 64 iFixit 4 mm precision bitsA 2 × 2 Gridfinity bin (83.5 × 83.5 mm, 4 units tall) holding 64 precision bits with the 4 mm hex shank used by iFixit Mako and Moray kits.Tiered nail polish display rackA stadium-style shelf that stands nail polish bottles in three rising rows so every shade is visible.Ninja Creami pint lid and cup holder rackA rack that stores the spare pint containers and lids for a Ninja Creami NC300 or NC500 so they are not stacked loose in the freezer door.