1
Replacement parts
Dyson V8 trigger lock clip
This is not a fixed STL. SpeakCAD generates the dyson v8 trigger lock clip to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Dyson V8 trigger lock clip, 35 mm wide, 2 mm walls wrapping the handle, tab that holds the trigger down, PETG.
What a dyson v8 trigger lock clip is
A clip that holds the power trigger of a Dyson V6, V7 or V8 down so you do not have to squeeze it for the whole clean. It is about 35 mm wide, wraps the pistol grip with 2 mm walls and has a small tab that presses the trigger in, then slides off to stop. Print on its side in PETG, or TPU for a softer grip.
The V10 and V11 have a different grip, and the V12 and V15 use a button. Open it free in SpeakCAD, adjust the width in the chat or the viewer, then download the STL.
People also search
dyson v8 trigger lockdyson trigger holder 3d printdyson v7 trigger clip stldyson trigger lock
Questions people ask about a dyson v8 trigger lock clip
A clip that holds the power trigger of a Dyson V6, V7 or V8 down so you do not have to squeeze it for the whole clean. It is about 35 mm wide, wraps the pistol grip with 2 mm walls and has a small tab that presses the trigger in, then slides off to stop. Print on its side in PETG, or TPU for a softer grip.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Dyson V8 trigger lock clip, 35 mm wide, 2 mm walls wrapping the handle, tab that holds the trigger down, PETG.
The V10 and V11 have a different grip, and the V12 and V15 use a button. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
SwitchBot Curtain 3 rod clamp for 28 mm polesA replacement clamp that lets a SwitchBot Curtain 3 ride a 28 mm wooden pole instead of the IKEA 25 mm it shipped with.IKEA BESTÅ 30 mm leg riserA 30 mm riser that screws onto a BESTÅ leg (M8) so a robot mop can pass under the TV unit.Bambu Lab P1S glass door handleA replacement handle for the front glass door of a P1S, for when the stock one cracks or peels off.Whirlpool dishwasher lower rack wheelA lower rack wheel for Whirlpool, KitchenAid and Maytag dishwashers in the style of part W10195416, about 32 mm across with a snap hub that clips onto the rack.Bialetti Moka Express 3-cup handleA replacement handle for the 3-cup Bialetti Moka Express, about 70 mm long, that fixes to the boss on the upper chamber with the original screw.Cordless drill battery latch buttonThe spring-loaded latch button that locks a battery pack into a cordless drill wears out or snaps its tab, so the pack slides off mid-job.