1
Replacement parts
Dyson V8 bin latch catch
This is not a fixed STL. SpeakCAD generates the dyson v8 bin latch catch to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a Dyson V8 bin latch catch, 20×12 mm, 3 mm pivot pin, 1.5 mm hook lip, PETG, printed on its side.
What a dyson v8 bin latch catch is
A replacement catch for the bin door of a Dyson V8, the small hook that breaks and lets the bin fall open. It is about 20 × 12 mm, pivots on a 3 mm pin with 0.2 mm clearance and has a 1.5 mm hook lip that catches the bin door. Print on its side in PETG so the hook is strong across the layers.
The V10 and V11 bins open a different way and need a different catch. Open the ready-made catch free in SpeakCAD, change the lip in the viewer or the chat, then download the STL.
People also search
dyson v8 bin latchdyson v8 bin catch replacementdyson bin door clip 3d printdyson v8 bin catch stl
Questions people ask about a dyson v8 bin latch catch
A replacement catch for the bin door of a Dyson V8, the small hook that breaks and lets the bin fall open. It is about 20 × 12 mm, pivots on a 3 mm pin with 0.2 mm clearance and has a 1.5 mm hook lip that catches the bin door. Print on its side in PETG so the hook is strong across the layers.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a Dyson V8 bin latch catch, 20×12 mm, 3 mm pivot pin, 1.5 mm hook lip, PETG, printed on its side.
The V10 and V11 bins open a different way and need a different catch. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Bosch fridge crisper drawer railA runner for the crisper drawer of Bosch and Siemens fridge freezers, the plastic rail that the vegetable drawer slides on.Roller blind idler end cap for 25 mm tubeAn idler end plug for roller blinds with a 25 mm tube, the non-chain end that carries the pin into the bracket.Curtain track glider setCurtain track gliders crack and stop sliding, leaving curtains bunched at one end, and matching the profile of an older track is rarely possible from a shop.Marking-gauge wheel-fence replacementA 40 mm fence that replaces a cracked marking-gauge head, 20 mm stem bore with an M5 pinch, and a 0.4 mm wheel slot.IKEA POÄNG foot felt-pad replacementA felt-faced pad that replaces a worn POÄNG foot (about 30 × 20 mm) so the birch runners stop scratching a wood floor.Creality K1 top filament guide with 608 bearingA filament guide that clips on the rear top edge of a Creality K1 and redirects filament from a spool on the back into the top of the extruder, with a 608 be…