1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
Dyson Supersonic diffuser wall hook
This is not a fixed STL. SpeakCAD generates the dyson supersonic diffuser wall hook to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a dyson supersonic diffuser wall hook is
A hook that hangs the wide Supersonic diffuser (about 95 mm across) next to the dryer so it is not the thing that never goes back in the box. The saddle is 40 mm and the plate is 50 × 40 × 16 mm with two 4.5 mm holes. Print in PETG with 2 mm walls.
The diffuser does not clip onto the Nural holder. Tell SpeakCAD diffuser vs wide-tooth, preview the hook in the browser for free, then download the STL.
Example prompt
Create a Supersonic diffuser wall hook 50×40×16 mm, 40 mm saddle, two 4.5 mm holes, 2 mm PETG.
People also search
dyson diffuser hook stlsupersonic diffuser holder 3d printdyson diffuser wall mountsupersonic diffuser hang 3d model
Questions people ask about a dyson supersonic diffuser wall hook
A hook that hangs the wide Supersonic diffuser (about 95 mm across) next to the dryer so it is not the thing that never goes back in the box. The saddle is 40 mm and the plate is 50 × 40 × 16 mm with two 4.5 mm holes. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Supersonic diffuser wall hook 50×40×16 mm, 40 mm saddle, two 4.5 mm holes, 2 mm PETG.
The diffuser does not clip onto the Nural holder. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
Cutlery tray sized to your kitchen drawerA five-section cutlery tray built to the exact internal width and depth of a kitchen drawer so it does not slide about or waste space at the sides.Bin bag roll dispenser for cabinet doorA slim box that holds a roll of bin bags inside a cabinet door and feeds one out through a slot.KitchenAid stand mixer bowl cover lid with pour chuteA splash lid for the 4.8 litre bowl of a KitchenAid Artisan tilt-head mixer that clips onto the rim and lets you add flour through a chute while the beater r…Hario Switch 02 paper-filter caddyA 110 × 40 × 80 mm caddy that holds a pack of 02 paper filters upright and dry next to a Hario Switch.Gillette Labs exfoliating-bar razor standA stand that holds a Gillette Labs razor by the bar so the blades dry, 20 mm saddle and a 40 mm drip tray.Breville Oracle Jet knock-box linerA liner that drops into the Oracle Jet knock box (about 140 × 90 × 80 mm) so you empty pucks without washing the stainless every shot.