1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
Dyson Outsize wand floor stand
This is not a fixed STL. SpeakCAD generates the dyson outsize wand floor stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a dyson outsize wand floor stand is
A floor stand that holds a Dyson Outsize wand and the extra-wide Motorbar so the taller vacuum does not lean on a wall. The base is 220 × 180 mm, the wand saddle is 40 mm, and a 280 × 40 mm trough parks the head. Print as two PETG halves with 2.4 mm walls.
A V15 stand is too short for the Outsize head. Tell SpeakCAD Outsize vs Outsize+, preview the stand in the browser for free, then download the STL.
Example prompt
Create a Dyson Outsize floor stand 220×180×80 mm, 40 mm wand saddle, 280×40 mm head trough, two PETG halves, 2.4 mm walls.
People also search
dyson outsize stand stloutsize wand holder 3d printdyson outsize floor dockoutsize vacuum stand 3d model
Questions people ask about a dyson outsize wand floor stand
A floor stand that holds a Dyson Outsize wand and the extra-wide Motorbar so the taller vacuum does not lean on a wall. The base is 220 × 180 mm, the wand saddle is 40 mm, and a 280 × 40 mm trough parks the head. Print as two PETG halves with 2.4 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Dyson Outsize floor stand 220×180×80 mm, 40 mm wand saddle, 280×40 mm head trough, two PETG halves, 2.4 mm walls.
A V15 stand is too short for the Outsize head. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
Philips Avent baby bottle drying rack with nipple pegsA compact drying rack for Philips Avent Natural bottles with pegs for the wide nipples, screw rings and caps that always end up in a puddle beside the sink.SodaStream Terra bottle drying treeA tree that holds three Terra / Duo bottles upside down on 22 mm pegs 80 mm tall with a 140 mm drip tray.Dyson Airwrap barrel drying treeA tree that stands four Airwrap barrels nozzle-up after you wipe them so water does not sit in the magnet.Vitamix Ascent A3500 cup drying treeA tree that dries two Ascent blending cups (about 600 ml, 80 mm ID) plus the blade bases so they are not in the dishwasher rack on their blades.Stackable fridge egg holder trayA tray that stores a dozen eggs in individual cups inside the fridge.Keurig K-Cup drawer insert with 24 pod slotsA flat insert that drops into an existing kitchen drawer and holds 24 K-Cup pods upright in a four by six grid.