1
Hobby & gaming
Drum key holder for stand tube
This is not a fixed STL. SpeakCAD generates the drum key holder for stand tube to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a drum key holder, C-clip for a 25.4 mm stand tube with TPU liner, 5.8 mm square peg for the key socket, 20 mm cradle for the wings.
What a drum key holder for stand tube is
A clip that keeps a drum key on your hi-hat or cymbal stand so it never goes missing. The C-clip grips a 25.4 mm tube with a TPU liner, and the holder has a 5.8 mm square peg that the key's 5.5 mm socket slides over plus a 20 mm cradle for the wings. Print in PETG with the clip flat on the bed.
Thinner upper tubes around 19 to 22 mm need a smaller clip; tell the chat the tube size. Open the ready-made model in SpeakCAD for free, change the diameter in the viewer or the chat, then download the STL.
People also search
drum key holder stldrum key holder 3d printdrum key clip for standdrum tuning key keeper
Questions people ask about a drum key holder for stand tube
A clip that keeps a drum key on your hi-hat or cymbal stand so it never goes missing. The C-clip grips a 25.4 mm tube with a TPU liner, and the holder has a 5.8 mm square peg that the key's 5.5 mm socket slides over plus a 20 mm cradle for the wings. Print in PETG with the clip flat on the bed.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a drum key holder, C-clip for a 25.4 mm stand tube with TPU liner, 5.8 mm square peg for the key socket, 20 mm cradle for the wings.
Thinner upper tubes around 19 to 22 mm need a smaller clip; tell the chat the tube size. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Meta Quest 3S headset desk standA compact stand for a Meta Quest 3S (191.5 × 102 × 142.5 mm) that rests the headset on a 60 mm wide saddle under the front of the strap, so the lenses face d…Drumstick holder for stand clampA holder that clamps to a drum or cymbal stand and keeps four pairs of sticks upright.RC car body post extensionBody post extensions raise an RC car shell to clear larger tyres or a taller chassis, and the stock posts are rarely long enough.Meta Quest 3 head strap battery pack mountA counterweight cradle that straps a slim USB power bank to the rear of a Meta Quest 3 or Quest 3S standard head strap, extending play time and balancing the…Toniebox 2 wall shelf with Tonie pegsA 220 mm shelf that holds a Toniebox 2 and six Tonies on 8 mm pegs.Boss RC-5 pedalboard riserA 20 mm riser that lifts an RC-5 so you can hit it behind a row of 55 mm pedals, 75 × 65 mm with 3M-pad recesses.