Hobby & gaming

Meta Quest 3 head strap battery pack mount

A counterweight cradle that straps a slim USB power bank to the rear of a Meta Quest 3 or Quest 3S standard head strap, extending play time and balancing the 515 g headset. The pocket is sized for a 100 x 52 x 26 mm bank such as the Anker 10000 mAh or a slim 5000 mAh cell, with 0.5 mm clearance, an open bottom for the USB-C lead, and two 25 mm wide slots that the rear strap threads through. A curved 3 mm back plate spreads the load across the strap pad and a 15 mm elastic loop keeps the bank from bouncing during Beat Saber. Print it on its flat back with 2 mm walls.

Battery straps for the Quest are pricey and lock you into one battery. In SpeakCAD you type your power bank's dimensions and strap width, preview the cradle in the browser without spending anything, adjust the curve in the chat and download the STL.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Design a Quest 3 head strap battery mount for a 100 x 52 x 26 mm power bank with 0.5 mm clearance, open bottom for a USB-C cable, two 25 x 4 mm strap slots, a curved 3 mm back plate with 90 mm radius, a 15 mm elastic retaining loop and 2 mm walls.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More hobby & gaming

Guitar pick holder with headstock clipPicks vanish constantly, and a holder that clips onto the headstock keeps four within reach mid-song.Wall-mounted SD card and battery holderCamera batteries and SD cards pile up fast, and a wall-mounted holder keeps charged batteries and empty cards separate from used ones.ASUS ROG Ally charging stand with angled cradleAn angled cradle for the ASUS ROG Ally and ROG Ally X (280 x 111 x 21 mm at the body, up to 32 mm at the grips) that keeps the handheld upright on a desk whi…Gunpla HG action base adapter with 3 mm pegA small saddle that lets High Grade Gunpla kits without a dedicated stand hole sit on a Bandai Action Base 4 or 5 arm.Funko Pop shelf riser three tier for boxed figuresA stepped riser that lifts the back rows of boxed Funko Pop figures so all three rows are visible on a normal bookshelf.Round miniature bases with slotSlotted round bases hold metal or resin miniatures with a tab underneath, and buying them in odd sizes gets expensive.

Make your meta quest 3 head strap battery pack mount now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.