1
Organizers & storage
DJI RS 4 quick-release plate wall rack
This is not a fixed STL. SpeakCAD generates the dji rs 4 quick-release plate wall rack to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a wall rack with three 38.6 mm Arca dovetail slots, 45° walls, 80 mm deep with end stops, 25 mm apart, two 4 mm countersunk holes.
What a dji rs 4 quick-release plate wall rack is
A wall rack for spare DJI RS 4 and RS 4 Pro quick-release plates, which use a 38 mm Arca-Swiss dovetail. It has three 38.6 mm dovetail slots with 45° walls, each 80 mm deep with an end stop, spaced 25 mm apart, and two 4 mm countersunk screw holes. Print on its back in PETG.
The RS 4 Mini plate is shorter but still Arca width, so it fits, while Manfrotto 200PL plates are 52 mm wide and will not. Open the ready-made model in SpeakCAD for free, change the slot count in the viewer or the chat, then download the STL.
People also search
dji rs 4 plate holder stlarca plate storage 3d printgimbal quick release plate rackrs4 plate wall mount
Questions people ask about a dji rs 4 quick-release plate wall rack
A wall rack for spare DJI RS 4 and RS 4 Pro quick-release plates, which use a 38 mm Arca-Swiss dovetail. It has three 38.6 mm dovetail slots with 45° walls, each 80 mm deep with an end stop, spaced 25 mm apart, and two 4 mm countersunk screw holes. Print on its back in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a wall rack with three 38.6 mm Arca dovetail slots, 45° walls, 80 mm deep with end stops, 25 mm apart, two 4 mm countersunk holes.
The RS 4 Mini plate is shorter but still Arca width, so it fits, while Manfrotto 200PL plates are 52 mm wide and will not. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
21700 battery storage tray for 8 cells with polarity marksA desktop tray that keeps eight 21700 lithium cells upright and separated, handy for vape, torch, power bank and e-bike battery projects.Canon LP-E6 battery holder with SD card slotsA camera-bag organizer that carries three Canon LP-E6, LP-E6N or LP-E6NH batteries, the 38.4 x 21 x 56.8 mm pack shared by the EOS R6, R6 Mark II, R5 and 5D…Roland SP-404MKII SD-card caddyA caddy that clips under an SP-404MKII and holds four SD cards in 33 × 3 mm slots plus a 20 mm stylus well.SRAM AXS battery wall caddyA caddy that hangs four AXS batteries (about 40 × 20 × 15 mm) on a 4.5 mm hole pair so spares are not in a bag.82 mm screw-in filter case with four slotsA flat case for four 82 mm screw-in filters (the frame is about 85 mm across and 5 mm thick for slim ND, CPL and UV filters).Gridfinity bin for HSS drill bits 1 to 10 mmA 3 × 1 Gridfinity bin (125.5 × 41.5 mm, 6 units tall) for a 19-piece metric HSS drill set from 1 to 10 mm in 0.5 mm steps.