1
Desk & office
DJI Osmo Action 5 Pro desk stand
This is not a fixed STL. SpeakCAD generates the dji osmo action 5 pro desk stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a desk stand for a DJI Osmo Action 5 Pro, 80 mm round base with a weight pocket, 45 mm post, three 3 mm fingers 15 mm wide, 5.2 mm hole.
What a dji osmo action 5 pro desk stand is
A weighted desk stand for the DJI Osmo Action 5 Pro (70.5 × 44.2 × 32.8 mm) on its quick-release adapter. The base is 80 mm across and 12 mm thick with a pocket for coins or steel washers, and a 45 mm post ends in three 3 mm fingers 15 mm wide with a 5.2 mm hole for the adapter's M5 screw. Print the base flat and the post on its side in PETG.
The Osmo Action 4 has the same body size and adapter, so it fits too; the Osmo 360 needs a different mount. Open the ready-made model in SpeakCAD for free, change the post height in the viewer or the chat, then download the STL.
People also search
osmo action 5 pro stand stldji action 5 desk mount 3d printosmo action 5 pro tripod standaction cam desk stand
Questions people ask about a dji osmo action 5 pro desk stand
A weighted desk stand for the DJI Osmo Action 5 Pro (70.5 × 44.2 × 32.8 mm) on its quick-release adapter. The base is 80 mm across and 12 mm thick with a pocket for coins or steel washers, and a 45 mm post ends in three 3 mm fingers 15 mm wide with a 5.2 mm hole for the adapter's M5 screw. Print the base flat and the post on its side in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a desk stand for a DJI Osmo Action 5 Pro, 80 mm round base with a weight pocket, 45 mm post, three 3 mm fingers 15 mm wide, 5.2 mm hole.
The Osmo Action 4 has the same body size and adapter, so it fits too; the Osmo 360 needs a different mount. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
COROS Pace 3 charger clip dockA bedside dock that holds a COROS Pace 3 (about 42 mm) on its pogo-clip charger at 20 degrees.MacBook Pro 16-inch M4 Pro vertical standA vertical stand for a 16-inch MacBook Pro M4 Pro (about 16.8 mm closed, 356 mm wide) with a 18 × 358 mm slot, a 24 mm MagSafe cutout and a 160 × 110 mm base.AirPods Pro 3 desk charging wellA well that parks an AirPods Pro 3 case (about 61 × 46 × 22 mm) on its USB-C or MagSafe side so the stem LEDs stay visible.Keychron Lemokey P1 palm restA 18 mm palm rest for a Lemokey P1 (about 370 × 140 mm) with a 8 mm front radius and four 3 mm foot recesses.MOTU M2 angled desk standA stand that tilts a MOTU M2 audio interface (about 190 × 109 × 45 mm) 15° towards you so the meters and knobs are easier to read.Oura Ring charger puck desk dock with ring restA small desk dock that holds the round Oura Ring charger, roughly 50 mm across on Gen3 and Ring 4, and raises it so the ring sits on the post at a comfortabl…