1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Bosch L-BOXX 102 bit insert
This is not a fixed STL. SpeakCAD generates the bosch l-boxx 102 bit insert to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a bosch l-boxx 102 bit insert is
An insert that holds 40 bits in an L-BOXX 102 (about 357 × 316 mm) on 7 mm rails so they replace the foam. The plate is 340 × 300 × 16 mm. Print flat in PETG with 1.6 mm walls.
The L-BOXX 238 jigsaw-blade insert is a taller box. Tell SpeakCAD bit count, preview the insert in the browser without paying, then download the STL.
Example prompt
Model an L-BOXX 102 bit insert 340×300×16 mm, 7 mm rails for 40 bits, 1.6 mm PETG.
People also search
l-boxx 102 insert stlbosch lboxx bit tray 3d printl-boxx 102 organizerbosch 102 bit insert 3d model
Questions people ask about a bosch l-boxx 102 bit insert
An insert that holds 40 bits in an L-BOXX 102 (about 357 × 316 mm) on 7 mm rails so they replace the foam. The plate is 340 × 300 × 16 mm. Print flat in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an L-BOXX 102 bit insert 340×300×16 mm, 7 mm rails for 40 bits, 1.6 mm PETG.
The L-BOXX 238 jigsaw-blade insert is a taller box. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Dremel 4000 plunge router base with depth stopA small router base that threads onto the nose of a Dremel 4000, 3000 or 8220 so the tool can cut inlays, dados and hinge recesses with a 3.2 mm shank bit.Creality K1C poop deflector binA deflector that sends K1C purge off the right side into a 100 × 60 × 45 mm bin instead of onto the bed heater wires.Helping-hands PCB vise 80 mmA small vise with 80 mm jaws and a 6 mm ball joint that holds a PCB at any angle.Pinecil V2 stand with brass-tip wellA stand that parks a Pinecil V2 at 45 degrees with a 10 mm brass-wool well and a 8 mm tip rack for three tips.Steam Deck OLED microSD eject toolA tool that ejects a Steam Deck OLED microSD without a paperclip, 60 × 8 × 2 mm with a 1.2 mm tip and a 12 mm finger hole.Dowel drilling guide jigFor dowel joints the two mating holes must line up exactly, and this self-centering guide makes that repeatable.